10482 2016-10-21 21:29:44 +0000 Serial terminal shows no output in joule with meta-intel 2016-11-03 21:38:35 +0000 1 1 7 Build System, Metadata & Runtime BSPs bsps-meta-intel 2.2 x86 other RESOLVED FIXED Possible release blocker Medium+ normal 2.2 M4 1 benjamin.esquivel sgw alejandro.hernandez kevin.tian sgw jair.de.jesus.gonzalez.plascencia --- --- No (bug/feature does not impact docs) oldest_to_newest 67465 0 benjamin.esquivel 2016-10-21 21:29:44 +0000 When booting joule with meta-intel, the serial console shows nothing right after the boot selection. In contrast, the kernel boot messages and the login console DO appear at the video output. With: poky: 4b94b49 meta-intel: 8dbd551 Instructions to reproduce: 1. build a core image minimal with meta intel's machine intel-corei7-64 2. burn the hddimg image to an sd card using dd 3. attach a usb type b cable to the joule (serial console goes through here) 4. start a terminal reader onto the port where your ttyUSB registered 5. boot the sd card in a joule machine 6. the expectation is that the kernel boot messages appear at the serial console. it is worth mentioning that ostro OS XT does output to the serial console and exposes a terminal to interact with joule. 67467 1 benjamin.esquivel 2016-10-21 21:52:22 +0000 The same image was tested in a minnowboard and it does output the serial console as expected. 67639 2 sgw 2016-10-27 14:42:50 +0000 After some research, it appears that the first console= entry is what is used, since currently RMC appends to the existing kernel cmdline the first entry is still ttyS0, not ttyS2 which is what the Joule requires. 67917 3 sgw 2016-11-03 15:31:04 +0000 A patch series was applied to meta-intel to enable RMC on the Joule http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/commit/?h=morty&id=3d83758e3c4ee050c56d158f6ada1b40b64f8fc3 67932 4 benjamin.esquivel 2016-11-03 20:00:34 +0000 I pulled meta-intel and verified that the patch: rmc: Add bootloader entries for the Broxton-M/Joule platform was there, I built a core-image-minimal that I transferred to an sd card and booted it. I am able to start the booting from the serial console but I see no output there later. Then when I look at the video output, the image booted fine. Is there something I need to place in my config to pick this change up?