1203 2011-06-28 12:27:39 +0000 Beagleboard: set TARGET_FPU=hard 2011-10-06 15:42:43 +0000 1 1 7 Build System, Metadata & Runtime BSPs bsps-configuration unspecified Beagleboard Multiple VERIFIED FIXED Final meta-yocto patch sent to list (6-Sep-2011) Medium normal 1.1 1 dvhart dvhart yp.bsp.watcher yp.watcher --- --- --- oldest_to_newest 14452 0 dvhart 2011-06-28 12:27:39 +0000 TARGET_FPU is soft by default and needs to be set to hard to take advantage of the floating point hardware on the beagleboard. This is set in DISTRO configuration policy in things like angstrom. It isn't clear to me where this change should be made, but we do need to enable hardware floating point on the beagleboard. 14453 1 dvhart 2011-06-28 12:32:13 +0000 The MPC8315e handles this as follows: meta-yocto/conf/machine/mpc8315e-rdb.conf:TARGET_FPU = "spe" perhaps the right fix is to add "TARGET_FPU='hard'" to beagleboard.conf ? 15567 2 dvhart 2011-08-18 15:47:23 +0000 I have second patch series that specifies using hard fp in the beagleboard conf after some updates to cortexa8 tune. It boots on bbxm, prints garbage on C4. It is ignoring the boot.scr. Debugging that before submitting. 16065 3 dvhart 2011-09-06 09:39:32 +0000 Final patch adds a commented out DEFAULT_TUNE and some comments describing how to enable hard fp - but leaves it disabled by default. 16772 4 dvhart 2011-10-06 15:41:47 +0000 http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=e30a104c9c26ab47ba91939b585d113873cfb4c5 16773 5 dvhart 2011-10-06 15:42:43 +0000 .