13017 2018-11-11 19:52:32 +0000 PnP target QA 2026-01-29 16:19:30 +0000 1 1 10 QA/Testing Runtime Testing general 2.7 x86 Multiple RESOLVED INVALID Medium normal 5.99 1 akuster unassigned randy.macleod richard.purdie --- --- Yes (doc changes required) oldest_to_newest 82157 0 akuster 2018-11-11 19:52:32 +0000 Can we create some mechanism to allow easier end developer testing on real hardware ('plug a board into their laptop and go')? 94866 1 yoann.congal 2023-02-02 16:51:24 +0000 As discussed in today's bug triage meeting. What we guess is asked is for Yocto to build the tools necessary to flash/debug the board at the same time it builds the image. For example : * STM32MP1 BSP layer build openocd-native (JTAG debugger tool) with the image : https://github.com/STMicroelectronics/meta-st-stm32mp/blob/ca501bd7dbe023682903ceedddaacd940b0898f4/conf/machine/include/st-machine-common-stm32mp.inc#L362-L368 * Atmel BSP layer had a tool to flash the board : https://github.com/linux4sam/meta-atmel/commit/9da3978412adc4f9f9fb5f1633de1d322a76c2eb and https://github.com/linux4sam/meta-atmel/commit/aabcfa27791b2d49550b527237dcbe8126b06597 "AT91Bootstrap: remove at91bootstrap-sam-ba recipe" ... but, these tools might be better suited for the specific BSP layers than OE-Core (since they can't realistically be common enough to be shared) 96984 2 randy.macleod 2023-10-24 14:24:56 +0000 Bulk move from 4.99 or 0.00 to 5.99 104111 3 randy.macleod 2026-01-29 16:19:30 +0000 Not detailed enough and kind of out of scope.