2432 2012-05-07 22:22:48 +0000 connman: 3g connection times out 2012-05-24 20:04:54 +0000 1 1 7 Build System, Metadata & Runtime OE-Core connectivity 1.2 x86 Multiple RESOLVED NOTABUG Medium normal 1.2.1 1 dvhart dongxiao.xu jiajun.xu meta.mr.watcher meta.watcher yilongx.y.sun --- --- --- oldest_to_newest 21150 0 dvhart 2012-05-07 22:22:48 +0000 Using test-connman (from the connman-tests package) to connect to a 3G network on the FRI2 fails with a timeout. A bit of hardware context: # lsusb | grep Eric Bus 001 Device 002: ID 0bdb:190d Ericsson Business Mobile Networks BV # lsmod | grep cdc cdc_wdm 7329 0 cdc_acm 14230 4 And for connman: # ./test-connman services * Wired { ethernet_00b3386ee31d_cable } AT&T { cellular_310410469131422_context1 } # ./test-connman connect cellular_310410469131422_context1 net.connman.Error.OperationTimeout: Operation timeout # ./list-services | grep cellular -A 22 [ /net/connman/service/cellular_310410469131422_context1 ] Strength = 80 Nameservers = [ ] State = failure Provider = { } Type = cellular Security = [ ] AutoConnect = false Immutable = false Proxy = { } Roaming = 0 IPv4.Configuration = { Method=dhcp } IPv6.Configuration = { Method=auto Privacy=disabled } Name = AT&T Favorite = false Error = connect-failed Domains = [ ] Ethernet = { Method=auto } Nameservers.Configuration = [ ] Proxy.Configuration = { } Domains.Configuration = [ ] IPv4 = { } IPv6 = { } t# dmesg | grep usb0 cdc_ncm 1-2:1.6: usb0: register 'cdc_ncm' at usb-0000:05:02.3-2, CDC NCM, 02:80:37:ec:02:00 ADDRCONF(NETDEV_UP): usb0: link is not ready cdc_ncm: usb0: network connection: disconnected cdc_ncm: usb0: 21 mbit/s downlink 5 mbit/s uplink cdc_ncm: usb0: network connection: connected ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready usb0: no IPv6 routers present cdc_ncm: usb0: network connection: disconnected ADDRCONF(NETDEV_UP): usb0: link is not ready cdc_ncm: usb0: 21 mbit/s downlink 5 mbit/s uplink cdc_ncm: usb0: network connection: connected ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready usb0: no IPv6 routers present cdc_ncm: usb0: network connection: disconnected ADDRCONF(NETDEV_UP): usb0: link is not ready 21241 1 dongxiao.xu 2012-05-09 06:51:07 +0000 Hi Darren, I tried it locally with 1.2 image for FRI2, and it works well in my side. You can follow the steps as: (To do the steps, you need to install the ofono-test package.) - Make sure "connmand" and "ofonod" are running in the system. - Make sure the 3G modem device is installed. We can verify this step by the ofono's test program "list-modems". - Enable and online the 3G modem by running "enable-modem" and "online-modem" - Set the 3G connection context by running ofono's tool "create-internet-context". This includes the settings for ISP, AccessPointName, Protocol, etc. - Run the created 3G connection context by "activate-context". After this, the 3G network interface should be established. - Add DNS server address into /etc/resolv.conf, or use the default value. - Configure the address, netmask for the 3G network interface. - Verify the 3G connection by "ping www.intel.com" or other. Thanks, Dongxiao 21249 2 dvhart 2012-05-09 15:26:59 +0000 I will try the commands you listed... but I don't see how these make the bug invalid. The bug was opened against connman, because as I understand it, the commands I listed should bring up the 3g connection. Regardless, please don't close a bug as invalid without giving the reported a chance to verify the proposed resolution. 21251 3 dvhart 2012-05-09 18:01:53 +0000 Running through the commands in Comment #1 were successful up to the activate-context command which reported an error: root@fri2:/usr/lib/ofono/test# ./enable-modem Connecting modem /mbm_0... root@fri2:/usr/lib/ofono/test# ./online-modem Setting modem /mbm_0 online... root@fri2:/usr/lib/ofono/test# ./create-internet-context Found context /mbm_0/context1 root@fri2:/usr/lib/ofono/test# ./activate-context Error activating /mbm_0/context1: org.ofono.Error.Failed: Operation failed root@fri2:/usr/lib/ofono/test# ./list-modems [ /mbm_0 ] Features = gprs net cbs ussd gps sms stk rat sim Emergency = 0 Powered = 1 Lockdown = 0 Interfaces = org.ofono.ConnectionManager org.ofono.NetworkRegistration org.ofono.CellBroadcast org.ofono.SupplementaryServices org.ofono.LocationReporting org.ofono.SmartMessaging org.ofono.PushNotification org.ofono.MessageManager org.ofono.SimToolkit org.ofono.RadioSettings org.ofono.SimManager Online = 1 Model = F5521gw Revision = R2A07(R2A07) Type = hardware Serial = 356215040140315 Manufacturer = Ericsson [ org.ofono.ConnectionManager ] Powered = 1 Attached = 1 Bearer = none Suspended = 0 RoamingAllowed = 0 [ org.ofono.NetworkRegistration ] Status = registered Strength = 80 Name = AT&T LocationAreaCode = 33998 Mode = auto-only MobileCountryCode = 310 Technology = hspa CellId = 13805302 MobileNetworkCode = 410 [ org.ofono.CellBroadcast ] Topics = Powered = 1 [ org.ofono.SupplementaryServices ] State = idle [ org.ofono.LocationReporting ] Type = nmea Enabled = 0 [ org.ofono.SmartMessaging ] [ org.ofono.PushNotification ] [ org.ofono.MessageManager ] Alphabet = default UseDeliveryReports = 0 Bearer = cs-preferred ServiceCenterAddress = +13123149810 [ org.ofono.SimToolkit ] IdleModeIcon = MainMenuTitle = MainMenu = MainMenuIcon = [ org.ofono.RadioSettings ] TechnologyPreference = any [ org.ofono.SimManager ] Retries = [pin2 = 3] [puk2 = 10] [pin = 3] [puk = 10] MobileCountryCode = 310 FixedDialing = 0 SubscriberNumbers = PreferredLanguages = en BarredDialing = 0 CardIdentifier = 89014104254691314226 LockedPins = MobileNetworkCode = 410 SubscriberIdentity = 310410469131422 Present = 1 PinRequired = none While I didn't expect it to work, at this point I reran the connman commands: root@fri2:/usr/lib/connman/test# ./test-connman services * Wired { ethernet_00b3386ee31d_cable } AT&T { cellular_310410469131422_context1 } root@fri2:/usr/lib/connman/test# ./list-services | grep cellular -A 22 [ /net/connman/service/cellular_310410469131422_context1 ] IPv6.Configuration = { Method=auto Privacy=disabled } AutoConnect = false Strength = 80 Name = AT&T Nameservers = [ ] Proxy.Configuration = { } Provider = { } Favorite = false Domains.Configuration = [ ] State = idle Proxy = { } Nameservers.Configuration = [ ] IPv4 = { } IPv6 = { } Domains = [ ] Ethernet = { Method=auto } Security = [ ] IPv4.Configuration = { Method=dhcp } Type = cellular Immutable = false Roaming = 0 root@fri2:/usr/lib/connman/test# ./test-connman connect cellular_310410469131422_context1 net.connman.Error.Failed: Input/output error Note the final Input/output error instead of the timeout. So I see two potential issues: 1) ofono tests are not able to establish a connection 2) connman and ofono do not appear to be working together properly 21259 4 dongxiao.xu 2012-05-10 00:15:21 +0000 What's the commit/branch are you using to test connman 3g feature? 21266 5 dvhart 2012-05-10 06:27:50 +0000 poky: denzil meta-intel: local fri2 branch 21267 6 dvhart 2012-05-10 06:30:28 +0000 Note that later today I was able to acquire an IP address on the 3g modem using just ofono-tests. DNS lookup was working. wget and ssh would report "Connection Refused" and ping would just sit there. I've sent a note to the ofono list on this subject. 21300 7 dongxiao.xu 2012-05-11 07:14:24 +0000 Yilong, could you help to have a try on this one? I have some steps posted in previous comments. 21332 8 yilongx.y.sun 2012-05-14 08:07:22 +0000 I have tried 3G network on the FRI2 according to [Comment 1] steps. it works well. i can ping [www.sina.com] by Ethernet or 3G network. test environment： Tree/Branch: poky/denzil Commit: 3bf8069100e54153d13319dc32ca089327b6a139 Meta-intel: Master Commit: f89405e115d73426c8a6450b6e795b5885d6bdf3 test tools: ofono-tests-1.5-r1.core2.rpm 21343 9 dvhart 2012-05-14 16:03:19 +0000 It appears the trouble I am having here has been to do with using a WAP-only SIM and some necessary configuration. I will close this as not-a-bug. We still need to get connman-gnome to work though. As you appear to have a functional 3G SIM. Can you check if connman-gnome lists the 3G interface and if it can bring it up successfully? If there are some specific steps that were necessary, can you please write those up so I can include them in the FRI2 BSP README? Thanks! 21350 10 dongxiao.xu 2012-05-15 01:03:25 +0000 Currently the 3G configuration is not functional in connman-gnome, and I think Paul will look at it since he re-wrote the connman-gnome due to API update. 21477 11 dongxiao.xu 2012-05-21 07:16:39 +0000 Darren, could you help to close the bug? Or you need bug asigner to close it? 21591 12 dvhart 2012-05-24 20:04:54 +0000 Chalking this one up to user error (or possibly lack of documentation regarding using 3G modems with ofono and connman).