3338 2012-10-26 02:38:13 +0000 iptables-1.4.15: autoreconf run failed on gmae-toolchain 2013-03-20 15:05:13 +0000 1 1 6 Yocto Project Subprojects ADT adt 1.4 x86 Multiple VERIFIED FIXED Design Medium+ normal 1.4 M5 1 liang.li2 hongxu.jia alexandru.c.georgescu jack jessica.zhang laurentiu.palcu laurentiu.serban liezhi.yang poky.adt.watcher poky.watcher richard.purdie sgw yi.zhao zhenfeng.zhao --- --- --- oldest_to_newest 26941 0 liang.li2 2012-10-26 02:38:13 +0000 the bug similar to bug 3100, the toolchain is installed on "/home/yocto/mips_toolchain/" , not in "/opt/poky/". run "autoreconf" of gmae-toolchain from: http://autobuilder.pokylinux.org/nightly/20121024-1/toolchain/x86_64/poky-eglibc-x86_64-mips-toolchain-gmae-1.3+snapshot-20121024.sh errors met below: ----------- libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. libtoolize: copying file `build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. libtoolize: copying file `m4/libtool.m4' libtoolize: copying file `m4/ltoptions.m4' libtoolize: copying file `m4/ltsugar.m4' libtoolize: copying file `m4/ltversion.m4' libtoolize: copying file `m4/lt~obsolete.m4' /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libipq.la': linking libtool libraries using a non-POSIX /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' libipq/Makefile.am:7: while processing Libtool library 'libipq.la' /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libip4tc.la': linking libtool libraries using a non-POSIX /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' libiptc/Makefile.am:8: while processing Libtool library 'libip4tc.la' /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libip6tc.la': linking libtool libraries using a non-POSIX /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' libiptc/Makefile.am:8: while processing Libtool library 'libip6tc.la' /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libiptc.la': linking libtool libraries using a non-POSIX /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' libiptc/Makefile.am:8: while processing Libtool library 'libiptc.la' /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libxtables.la': linking libtool libraries using a non-POSIX /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' libxtables/Makefile.am:6: while processing Libtool library 'libxtables.la' Can't locate strict.pm in @INC (@INC contains: /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/autoconf /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/site_perl/5.14.2/ /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/site_perl/5.14.2 /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/vendor_perl/5.14.2/ /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/vendor_perl/5.14.2 /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/5.14.2/ /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/5.14.2 /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/5.14.2 .) at /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/autoconf/Autom4te/Channels.pm line 70. BEGIN failed--compilation aborted at /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/autoconf/Autom4te/Channels.pm line 70. Compilation failed in require at /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/autoconf/Autom4te/ChannelDefs.pm line 19. BEGIN failed--compilation aborted at /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/share/autoconf/Autom4te/ChannelDefs.pm line 19. Compilation failed in require at /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/bin/gnu-configize line 40. BEGIN failed--compilation aborted at /home/yocto/mips_toolchain/sysroots/x86_64-pokysdk-linux/usr/bin/gnu-configize line 40. autoreconf: gnu-configize failed with exit status: 2 yocto@yocto-OptiPlex-990:/buildarea/tester/test_compile_toolchain_suse/iptables-1.4.15> perl -V Can't locate Config.pm in @INC (@INC contains: /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/site_perl/5.14.2/ /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/site_perl/5.14.2 /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/vendor_perl/5.14.2/ /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/vendor_perl/5.14.2 /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/5.14.2/ /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/5.14.2 /opt/poky/1.3+snapshot/sysroots/x86_64-pokysdk-linux/usr/lib/perl/5.14.2 .). BEGIN failed--compilation aborted. steps: 1. run "sh poky-eglibc-x86_64-mips-toolchain-gmae-1.3+snapshot-20121024.sh",set destination dir to "/home/yocto/mips_toolchain/". 2. run "source /home/yocto/mips_toolchain/environment-setup-mips32-poky-linux"/ 3. in iptables-1.4.15 directory,run "autoreconf -fi" or "./autogen.sh". test env: hosts: opensuse 12.1 x86_64 git info:33440ee70623394d06a4b214c2be10788cba6d08 git branch: poky/master 26942 1 yi.zhao 2012-10-26 02:48:27 +0000 This issue doesn't happen when using the default toolchain directory /opt/poky/, but only happens with a relocated directory. 27148 2 liezhi.yang 2012-11-01 13:18:54 +0000 Hi RP: Would you please help me to take a look at this: This is because the perl's @INC value is compiled into the binary, and we can't change it when install the SDK, the @INC's value is /opt/xxxx which is set when comile, but our SDK is relocatable now, there is a solution is set the PERLLIB or PERL5LIB in the "environment-setup-*", I tested it on openSUSE 12.1, got another error: "can't find libssp.so.0", I export the LD_LIBRARY_PATH as a quick workaround, the it worked well except there are several warnings: /home/lyang1/testsdk/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libipq.la': linking libtool libraries using a non-POSIX What do you think about export the "PERLLIB" or "PERL5LIB" to fix this problem? I will find a correct way to fix the "libssp.so.0" issue. 27195 3 richard.purdie 2012-11-02 11:34:16 +0000 perl-native already has a call: create_wrapper ${D}${bindir}/perl PERL5LIB='$PERL5LIB:${STAGING_LIBDIR}/perl/${PV}:${STAGING_LIBDIR}/perl/' Perhaps we should add this for nativesdk too? 27359 4 liezhi.yang 2012-11-12 15:33:52 +0000 (In reply to comment #3) > perl-native already has a call: > > create_wrapper ${D}${bindir}/perl > PERL5LIB='$PERL5LIB:${STAGING_LIBDIR}/perl/${PV}:${STAGING_LIBDIR}/perl/' > > Perhaps we should add this for nativesdk too? Hi RP: Yes, we should use a wrapper for the nativesdk-perl, and it does have other problems as you had pointed out:-). 1) The perl's Fcntl.so (and others) needs libssp.so.0 (stack-protector) which is in the SDK, but it can't find it. Laurentiu is working on this now. 2) After workaround the libssp.so issue, when run "autoreconf", there is an error if the host's perl's version is not the same as the one in the SDK, the error says that the executable perl mismatches the perl lib's version, this is because most of the autotools' scripts use the "#!/usr/bin/perl -w" which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to the SDK which causes the mismatch. We can make all the perl scripts to use the host perl or the SDK perl to fix this problem. I prefer to use the host's perl since there are 10 perl scripts (maybe not very accurate) use "#! /usr/bin/perl -w", but only 2 use "#!/bin/env perl", but if we make all these scripts use the host perl, then it seems that we don't need the nativesdk-perl any more. 3) There is another problem is that we only install the perl modules (pm), but doesn't install some corresponding shared libraries (so), for example the "Data::Dumper" which is needed by the autotools, we have installed the usr/lib/perl/5.14.2/Data/Dumper.pm, but didn't install the usr/lib/perl/5.14.2/auto/Data/Dumper/Dumper.so, so it doesn work. The nativesdk would work correctly after fix all the above issues, I think that another solution is removing the nativesdk-perl. 27616 5 laurentiu.palcu 2012-11-22 15:25:31 +0000 > 1) The perl's Fcntl.so (and others) needs libssp.so.0 (stack-protector) > which is in the SDK, but it can't find it. Laurentiu is working on this now. > Sent a patch for this issue on the mailing list. 28017 6 jessica.zhang 2012-12-06 00:14:59 +0000 Laurentiu, Is the patch merged? If so, please update the bug. thx 28021 7 liezhi.yang 2012-12-06 01:50:29 +0000 (In reply to comment #6) > Laurentiu, > > Is the patch merged? If so, please update the bug. thx Yes, Laurentiu's patch has been merged, but it still needs another two patches which I'm working on. // Robert 30353 8 hongxu.jia 2013-03-02 07:39:38 +0000 Merged into master: http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=820a64bfb7b27e3aaa3b8c0228c4ed70b64c03d1 30759 9 alexandru.c.georgescu 2013-03-15 19:55:31 +0000 Hello, I am reopening since I have some errors with the http://autobuilder.yoctoproject.org/pub/nightly/20130313-3/toolchain/x86_64/poky-eglibc-x86_64-i586-toolchain-gmae-1.3+snapshot-20130314.sh build. commit:4da406cd50cf02a63ed76810a670aba1eb561c79 Tested with Ubuntu 12.10 64bit and Fedora 17 64bit yocto@yocto-o1:~/0313-3/standalone-automated-MAR-4/iptables-1.4.15$ echo $CC i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/i586-poky-linux yocto@yocto-o1:~/0313-3/standalone-automated-MAR-4/iptables-1.4.15$ autoreconf -fi perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. libtoolize: copying file `build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. libtoolize: copying file `m4/libtool.m4' libtoolize: copying file `m4/ltoptions.m4' libtoolize: copying file `m4/ltsugar.m4' libtoolize: copying file `m4/ltversion.m4' libtoolize: copying file `m4/lt~obsolete.m4' perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libipq.la': linking libtool libraries using a non-POSIX /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' libipq/Makefile.am:7: while processing Libtool library 'libipq.la' /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libip4tc.la': linking libtool libraries using a non-POSIX /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' libiptc/Makefile.am:8: while processing Libtool library 'libip4tc.la' /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libip6tc.la': linking libtool libraries using a non-POSIX /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' libiptc/Makefile.am:8: while processing Libtool library 'libip6tc.la' /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libiptc.la': linking libtool libraries using a non-POSIX /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' libiptc/Makefile.am:8: while processing Libtool library 'libiptc.la' /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libxtables.la': linking libtool libraries using a non-POSIX /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk-linux/usr/share/automake-1.12/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac' libxtables/Makefile.am:6: while processing Libtool library 'libxtables.la' perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = (unset), LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). yocto@yocto-o1:~/0313-3/standalone-automated-MAR-4/iptables-1.4.15$ 30830 10 hongxu.jia 2013-03-19 08:14:54 +0000 > perl: warning: Setting locale failed. > perl: warning: Please check that your locale settings: > LANGUAGE = "en_US:en", > LC_ALL = (unset), > LANG = "en_US.UTF-8" > are supported and installed on your system. > perl: warning: Falling back to the standard locale ("C"). This has nothing to do with the relocation or adt. On the test machine, the `LC_ALL' is unset, warning can be removed if the following lines are added to `~/.bashrc': ... export LC_ALL=C ... > /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk- > linux/usr/share/automake-1.12/am/ltlibrary.am: warning: 'libipq.la': linking > libtool libraries using a non-POSIX > /home/yocto/0313-3/standalone-automated-MAR-4/sdk/sysroots/x86_64-pokysdk- > linux/usr/share/automake-1.12/am/ltlibrary.am: archiver requires > 'AM_PROG_AR' in 'configure.ac' > libipq/Makefile.am:7: while processing Libtool library 'libipq.la' This has nothing to do with the relocation or adt. It's an automake 1.12 issue, well known over internet. autoreconf can be run if the following lines are added to configure.ac: ... m4_pattern_allow([AM_PROG_AR]) AM_PROG_AR ... Maybe we should ignore the previous warnings. //Hongxu 30831 11 hongxu.jia 2013-03-19 08:22:52 +0000 If there is not other error, maybe we should close it. 30896 12 alexandru.c.georgescu 2013-03-20 15:05:13 +0000 verified as per last comment. I will open another bug which will cover the additional warnings that I found.