<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<!DOCTYPE bugzilla SYSTEM "https://bugzilla.yoctoproject.org/page.cgi?id=bugzilla.dtd">

<bugzilla version="5.0.6"
          urlbase="https://bugzilla.yoctoproject.org/"
          
          maintainer="it-coreprojects-helpdesk@linuxfoundation.org"
>

    <bug>
          <bug_id>503</bug_id>
          
          <creation_ts>2010-10-20 23:06:16 +0000</creation_ts>
          <short_desc>[emenlow] system cannot enter S3 standby mode</short_desc>
          <delta_ts>2012-02-21 23:35:42 +0000</delta_ts>
          <reporter_accessible>1</reporter_accessible>
          <cclist_accessible>1</cclist_accessible>
          <classification_id>7</classification_id>
          <classification>Build System, Metadata &amp; Runtime</classification>
          <product>Meta-yocto</product>
          <component>meta-yocto</component>
          <version>0.9</version>
          <rep_platform>E-Menlow</rep_platform>
          <op_sys>x86</op_sys>
          <bug_status>VERIFIED</bug_status>
          <resolution>FIXED</resolution>
          
          
          <bug_file_loc></bug_file_loc>
          <status_whiteboard>scheduled for completion on or before 1.1 M4 RC1 (Sept 6)</status_whiteboard>
          <keywords></keywords>
          <priority>Medium</priority>
          <bug_severity>normal</bug_severity>
          <target_milestone>1.2</target_milestone>
          
          
          <everconfirmed>1</everconfirmed>
          <reporter name="Jiajun Xu">jiajun.xu</reporter>
          <assigned_to name="Tom Zanussi">tom.zanussi</assigned_to>
          <cc>hongnax.xu</cc>
    
    <cc>jessica.zhang</cc>
    
    <cc>kevin.tian</cc>
    
    <cc>kunwei.tian</cc>
    
    <cc>poky.bs.watcher</cc>
    
    <cc>poky.watcher</cc>
    
    <cc>richard.purdie</cc>
    
    <cc>sgw</cc>
    
    <cc>wenhuax.fan</cc>
          
          
          <cf_os>---</cf_os>
          <cf_regression_type>---</cf_regression_type>
          
          <cf_docchange>---</cf_docchange>

      

      

      

          <comment_sort_order>oldest_to_newest</comment_sort_order>  
          <long_desc isprivate="0" >
    <commentid>10723</commentid>
    <comment_count>0</comment_count>
    <who name="Jiajun Xu">jiajun.xu</who>
    <bug_when>2010-10-20 23:06:16 +0000</bug_when>
    <thetext>Testing Env:    
Hardware: eMenlow
Poky gitinfo: 4ae9c0785e22c222cb7a80e6c9575f58858eac5c
All images file from http://autobuilder.pokylinux.org/milestone/20101018/.

We can not make eMenlow into S3 standby mode. System is still live and sometimes X window will be black.

Reproduce Steps:
1. Download emenlow live image from autobuilder
2. Boot up emenlow
3. Run command &quot;echo mem &gt; /sys/power/state&quot; to make system into S3 mode
4. Check with ping and ssh if the system enters S3</thetext>
  </long_desc><long_desc isprivate="0" >
    <commentid>11521</commentid>
    <comment_count>1</comment_count>
    <who name="Tom Zanussi">tom.zanussi</who>
    <bug_when>2011-01-18 07:53:44 +0000</bug_when>
    <thetext>It takes a few seconds, but it did seem to go into standby mode.  The power button goes off and the system comes back to the same state when powered back on, that is everything except for the display, which stays black and can&apos;t be brought back.</thetext>
  </long_desc><long_desc isprivate="0" >
    <commentid>12802</commentid>
    <comment_count>2</comment_count>
    <who name="Tom Zanussi">tom.zanussi</who>
    <bug_when>2011-03-17 23:20:25 +0000</bug_when>
    <thetext>My first check of this using the following poky/meta-intel commits actually worked perfectly.  Subsequent tries failed.  In the failed tries, the system goes into S3 state successfully and comes out successfully, except for video.  In the successful try, video/mouse/keyboard also came out successfully.  This is all using &apos;live mode&apos; booting off of usb.

I also had more successful attempts after I first installed to hd, but subsequent attempts mostly failed, though some did succeed.  Again, &apos;failed&apos; means only that video didn&apos;t come back, but network came back ok, etc and the system was functional except for video.

Trial and error showed that I could always successfully have S3 work and come back with video and everything else working if I removed the live USB key after issuing &apos;echo mem &gt; /sys/power/state&apos;.  The interesting thing is that in the &apos;successful&apos; case, with video and everything else coming back, there was actually a kernel panic in the restore.  See below.

poky: f432f1b01069c2083d420a2accde169f2dafdfab
meta-intel: 9497c977021d7cf76b129f5baeac0ea0b9f10e22

This is the output of dmesg from an &apos;unsuccessful&apos; restore i.e. video doesn&apos;t come back:

PM: Syncing filesystems ... done.
[drm] RGB0-1: set mode 1366x768 15
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
drm_sysfs_suspend
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:05: disabled
sdhci-pci 0000:00:1e.2: PCI INT C disabled
sdhci-pci 0000:00:1e.1: PCI INT B disabled
sdhci-pci 0000:00:1e.0: PCI INT A disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
psb 0000:00:02.0: PCI INT A disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
ehci_hcd 0000:00:1d.7: PCI INT D disabled
e1000e 0000:02:00.0: PME# enabled
pci 0000:00:1c.1: wake-up capability enabled by ACPI
HDA Intel 0000:00:1b.0: PCI INT A disabled
PM: suspend of devices complete after 707.723 msecs
PM: late suspend of devices complete after 15.553 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Extended CMOS year: 2000
Back to C!
PM: Restoring platform NVS memory
Extended CMOS year: 2000
ACPI: Waking up from system sleep state S3
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
pci 0000:00:1c.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x80308020)
pci 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x80108000)
pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010)
pci 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100107)
pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0xfff0, writing 0x80508040)
uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x5, writing 0x1)
uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x5, writing 0x1)
uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x5, writing 0x1)
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
e1000e 0000:02:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x10)
PM: early resume of devices complete after 0.713 msecs
psb 0000:00:02.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16
[psb:0x02:psb_gtt_init] GTT phys start: 0x7ffe0000.
[psb:0x02:psb_gtt_init] GTT start: 0xdff60000.
[psb:0x02:psb_gtt_init] GATT start: 0xd0000000.
[psb:0x02:psb_gtt_init] GTT pages: 32
[psb:0x02:psb_gtt_init] Stolen size: 3964 kiB
[psb:0x02:psb_gtt_init] Set up 991 stolen pages starting at 0x0007fc00
[psb:0x02:psb_gtt_init] Initializing the rest of a total of 32768 gtt pages.
HDA Intel 0000:00:1b.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -&gt; GSI 17 (level, low) -&gt; IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
uhci_hcd 0000:00:1d.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
uhci_hcd 0000:00:1d.1: PCI INT B -&gt; GSI 17 (level, low) -&gt; IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb3: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: PCI INT C -&gt; GSI 18 (level, low) -&gt; IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb4: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: PCI INT D -&gt; GSI 19 (level, low) -&gt; IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
sdhci-pci 0000:00:1e.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16
sdhci-pci 0000:00:1e.0: setting latency timer to 64
sdhci-pci 0000:00:1e.1: PCI INT B -&gt; GSI 17 (level, low) -&gt; IRQ 17
sdhci-pci 0000:00:1e.1: setting latency timer to 64
sdhci-pci 0000:00:1e.2: PCI INT C -&gt; GSI 18 (level, low) -&gt; IRQ 18
sdhci-pci 0000:00:1e.2: setting latency timer to 64
pata_sch 0000:00:1f.1: setting latency timer to 64
pci 0000:00:1c.1: wake-up capability disabled by ACPI
e1000e 0000:02:00.0: PME# disabled
serial 00:05: activated
sd 0:0:0:0: [sda] Starting disk
[drm] RGB0-1: set mode 1366x768 15
usb 2-2: reset low speed USB device using uhci_hcd and address 2
usb 3-2: reset low speed USB device using uhci_hcd and address 2
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
PM: resume of devices complete after 2719.694 msecs
Restarting tasks ... done.
[psb:0x01:psb_irq_postinstall] Setting up MSVDX IRQs.....
buffer underrun 0x2

This is the output of dmesg from a &apos;failed&apos; restore i.e. video does come back:

PM: Syncing filesystems ... done.
[drm] RGB0-1: set mode 1366x768 15
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
drm_sysfs_suspend
serial 00:05: disabled
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sdhci-pci 0000:00:1e.2: PCI INT C disabled
sdhci-pci 0000:00:1e.1: PCI INT B disabled
sdhci-pci 0000:00:1e.0: PCI INT A disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
psb 0000:00:02.0: PCI INT A disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
ehci_hcd 0000:00:1d.7: PCI INT D disabled
e1000e 0000:02:00.0: PCI INT A disabled
e1000e 0000:02:00.0: PME# enabled
pci 0000:00:1c.1: wake-up capability enabled by ACPI
HDA Intel 0000:00:1b.0: PCI INT A disabled
PM: suspend of devices complete after 688.615 msecs
PM: late suspend of devices complete after 15.162 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Extended CMOS year: 2000
Back to C!
PM: Restoring platform NVS memory
Extended CMOS year: 2000
ACPI: Waking up from system sleep state S3
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
pci 0000:00:1c.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x80308020)
pci 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x80108000)
pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010)
pci 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100107)
pci 0000:00:1c.1: restoring config space at offset 0x9 (was 0xfff0, writing 0x80508040)
uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x5, writing 0x1)
uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x5, writing 0x1)
uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x5, writing 0x1)
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
e1000e 0000:02:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x10)
PM: early resume of devices complete after 0.712 msecs
psb 0000:00:02.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16
[psb:0x02:psb_gtt_init] GTT phys start: 0x7ffe0000.
[psb:0x02:psb_gtt_init] GTT start: 0xdff60000.
[psb:0x02:psb_gtt_init] GATT start: 0xd0000000.
[psb:0x02:psb_gtt_init] GTT pages: 32
[psb:0x02:psb_gtt_init] Stolen size: 3964 kiB
[psb:0x02:psb_gtt_init] Set up 991 stolen pages starting at 0x0007fc00
[psb:0x02:psb_gtt_init] Initializing the rest of a total of 32768 gtt pages.
HDA Intel 0000:00:1b.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -&gt; GSI 17 (level, low) -&gt; IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
uhci_hcd 0000:00:1d.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
uhci_hcd 0000:00:1d.1: PCI INT B -&gt; GSI 17 (level, low) -&gt; IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb3: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: PCI INT C -&gt; GSI 18 (level, low) -&gt; IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb4: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: PCI INT D -&gt; GSI 19 (level, low) -&gt; IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
sdhci-pci 0000:00:1e.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16
sdhci-pci 0000:00:1e.0: setting latency timer to 64
sdhci-pci 0000:00:1e.1: PCI INT B -&gt; GSI 17 (level, low) -&gt; IRQ 17
sdhci-pci 0000:00:1e.1: setting latency timer to 64
sdhci-pci 0000:00:1e.2: PCI INT C -&gt; GSI 18 (level, low) -&gt; IRQ 18
sdhci-pci 0000:00:1e.2: setting latency timer to 64
pata_sch 0000:00:1f.1: setting latency timer to 64
pci 0000:00:1c.1: wake-up capability disabled by ACPI
e1000e 0000:02:00.0: PME# disabled
serial 00:05: activated
sd 0:0:0:0: [sda] Starting disk
[drm] RGB0-1: set mode 1366x768 15
usb 2-2: reset low speed USB device using uhci_hcd and address 2
usb 3-2: reset low speed USB device using uhci_hcd and address 2
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
PM: resume of devices complete after 2656.076 msecs
Restarting tasks ... 
usb 1-5: USB disconnect, address 4
BUG: unable to handle kernel NULL pointer dereference at 00000010
IP: [&lt;c10e79f2&gt;] __mark_inode_dirty+0x112/0x1f0
*pde = 00000000 
Oops: 0000 [#1] PREEMPT 
last sysfs file: /sys/devices/virtual/vc/vcsa63/uevent
Modules linked in: drm psb ipv6

Pid: 467, comm: loop0 Not tainted 2.6.37.1-yocto-standard+ #1 To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M.
EIP: 0060:[&lt;c10e79f2&gt;] EFLAGS: 00010246 CPU: 0
EIP is at __mark_inode_dirty+0x112/0x1f0
EAX: 00000001 EBX: f5b32304 ECX: f62f2170 EDX: c158b528
ESI: 00000000 EDI: 00000000 EBP: f5507ec0 ESP: f5507e9c
 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process loop0 (pid: 467, ti=f5506000 task=f576bb60 task.ti=f5506000)
Stack:
 f5507f28 c114d630 f5b322e0 c1464c78 00000001 c10df453 f5b32304 f54a5c00
 4d822764 f5507edc c10dbc7a 00000000 00000003 00000400 192fec00 00000000
 f5507f3c c1247af8 192fec00 00000000 00000400 00000000 f5507f2c f5507f28
Call Trace:
 [&lt;c114d630&gt;] ? fat_get_block+0x0/0x270
 [&lt;c1464c78&gt;] ? sub_preempt_count+0x8/0xa0
 [&lt;c10df453&gt;] ? mnt_clone_write+0x43/0x70
 [&lt;c10dbc7a&gt;] ? file_update_time+0xaa/0x130
 [&lt;c1247af8&gt;] ? do_lo_send_aops+0x78/0x1c0
 [&lt;c1248230&gt;] ? transfer_none+0x0/0x80
 [&lt;c1247f6e&gt;] ? loop_thread+0x32e/0x4b0
 [&lt;c1247a80&gt;] ? do_lo_send_aops+0x0/0x1c0
 [&lt;c1247c00&gt;] ? do_lo_send_aops+0x180/0x1c0
 [&lt;c104b040&gt;] ? autoremove_wake_function+0x0/0x50
 [&lt;c1247c40&gt;] ? loop_thread+0x0/0x4b0
 [&lt;c104ac74&gt;] ? kthread+0x74/0x80
 [&lt;c104ac00&gt;] ? kthread+0x0/0x80
 [&lt;c10033b6&gt;] ? kernel_thread_helper+0x6/0x10
Code: 20 75 94 a8 07 75 90 8b b3 98 00 00 00 ba 28 b5 58 c1 8b 46 1c 8b 00 e8 5d c2 0d 00 85 c0 75 71 8b 83 a0 00 00 00 8b 78 38 31 f6 &lt;f6&gt; 47 10 02 8d 87 a0 00 00 00 89 45 f0 75 1e 8b 47 0c a8 10 0f 
EIP: [&lt;c10e79f2&gt;] __mark_inode_dirty+0x112/0x1f0 SS:ESP 0068:f5507e9c
CR2: 0000000000000010
---[ end trace 32c6146ae9d94510 ]---
note: loop0[467] exited with preempt_count 1
VFS: busy inodes on changed media or resized disk sdb
done.
[psb:0x01:psb_irq_postinstall] Setting up MSVDX IRQs.....
buffer underrun 0x1</thetext>
  </long_desc><long_desc isprivate="0" >
    <commentid>14403</commentid>
    <comment_count>3</comment_count>
    <who name="wenhua.fan">wenhuax.fan</who>
    <bug_when>2011-06-23 20:44:43 +0000</bug_when>
    <thetext>We can&apos;t get expectant result in Yocto 1.1 20110617 build testing.</thetext>
  </long_desc><long_desc isprivate="0" >
    <commentid>16298</commentid>
    <comment_count>4</comment_count>
    <who name="wenhua.fan">wenhuax.fan</who>
    <bug_when>2011-09-19 18:24:30 +0000</bug_when>
    <thetext>Run the command &apos;echo mem &gt; /sys/power/state&apos; against latest image, system still can&apos;t enter S3 standby mode.

Image location:

http://autobuilder03.jf.intel.com/pub/emenlow/20110916-1/machines/emenlow/core-image-sato-sdk-emenlow-20110916085642.hddimg

Commit information:

Tree/Branch: Poky/1.1_M4
Commit id: bb4a5c44da23a1bb363f1f081cf1644fd7975957
Meta Branch: 1.1_M4
Commit id: 49277afd9e5e510f7b1f82fd8cd10732e3bf2633</thetext>
  </long_desc><long_desc isprivate="0" >
    <commentid>17638</commentid>
    <comment_count>5</comment_count>
    <who name="Hongna Xu">hongnax.xu</who>
    <bug_when>2011-12-13 22:17:00 +0000</bug_when>
    <thetext>
The bug is not reproducible.
1.Run the command &apos;echo mem &gt; /sys/power/state&apos; , system enter S3 standby mode.
2.Press the power button , the system can recover normally.

Image location:

http://autobuilder03.jf.intel.com/pub/emenlow/20111206-1/machines/emenlow/core-image-minimal-emenlow-20111207041433.hddimg

Commit information:

Tree/Branch: Poky/1.2_M1
Commit id: b9d3a5224c7f76f273d5919a88b7460d35ad2574
Meta Branch: master branch
Commit id: 3d5574efe623923b24f78d77f1d4bd8ef8432698</thetext>
  </long_desc><long_desc isprivate="0" >
    <commentid>17713</commentid>
    <comment_count>6</comment_count>
    <who name="Hongna Xu">hongnax.xu</who>
    <bug_when>2011-12-18 16:38:51 +0000</bug_when>
    <thetext>The bug is not reproducible with the followed image,so set the status resoved fixed.
If anyone encounter this bug, pls reopen it.

Image location:

http://autobuilder03.jf.intel.com/pub/emenlow/20111213-1/machines/emenlow/core-image-sato-sdk-emenlow-20111214073225.hddimg  

Commit information:

Tree/Branch: Poky/1.2_M1
Commit: b806f726b1db2cb605869c1022ef727c1110255b
Meta: Master
Commit: b6d5d9a3b06caf578103a04dc5fcf5e476343205</thetext>
  </long_desc><long_desc isprivate="0" >
    <commentid>18691</commentid>
    <comment_count>7</comment_count>
    <who name="Hongna Xu">hongnax.xu</who>
    <bug_when>2012-02-21 23:35:42 +0000</bug_when>
    <thetext>It is fixed and verified on test version 1.1.1.

Poky/edison gitinfo: 69a3fba2aabfa37ebf27d9a2f33304d1c58e4436
meta-intel gitinfo: edison:34478f24de65dd8de8a4c8b913a1458d82dac1fa
Images location: http://autobuilder03.jf.intel.com/pub/nightly-meta-intel/20120217-1/machines/emenlow/core-image-sato-sdk-emenlow-20120217231115.hddimg</thetext>
  </long_desc>
      
      

    </bug>

</bugzilla>