6351 2014-05-20 14:03:32 +0000 Timing of Netboot is different if UEFI does not pass through UEFI Shell 2015-01-26 22:28:16 +0000 1 1 12 Hardware Platforms MinnowBoard MAX Firmware minnowboard-uefi-firmware unspecified MinnowBoard x86 RESOLVED WONTFIX Low minor Production Release 1 wmills chao.b.zhang scott.a.garman warthog9 --- --- Don't know oldest_to_newest 43425 0 wmills 2014-05-20 14:03:32 +0000 I am running Firmware version 1.0 If I change the boot order to immediatly boot to IPv4, the timing is quite a bit different than if I pass through the UEFI SHell. Shell Direct Initial delay 0 S 12 S Discover to Request delay 2 S 15 S UEFI Shell is boot option 0: Boot, esc, "exit", esc, "exit", choose IPv4 from boot menu "Start PXE over IPv4" comes out on HDMI and serial port Immediatly sends DHCP Discover packet and gets DHCP Offer waits *2* seconds Sends DHCP Request and process completes For Direct boot: "Start PXE over IPv4" comes out on HDMI and serial port waits *12* seconds Sends DHCP Discover packet and gets DHCP Offer waits *15* seconds Sends DHCP Request and process completes This makes me wonder if the timers are running on different rates in the two boot paths or similar init condition differences. 48315 1 warthog9 2015-01-26 22:28:16 +0000 MinnowBoard v1 has reached new feature EOL, FW development is done as are new hardware features. If you feel EXCEEDINGLY strongly about an issue please re-open it for discussion but be aware that we are recommending individuals migrate to the MAX platform.