6468 2014-06-19 17:28:15 +0000 MinnowMax can be run on power from either USB port 2017-06-13 18:02:41 +0000 1 1 12 Hardware Platforms MinnowBoard MAX hw-minnowmax 2C A0 MinnowBoard Max Multiple RESOLVED MOVED Low minor A4 Release 1 max.eliaser david.anders sjolley.yp.pm yoctoproject --- --- Yes (doc changes required) oldest_to_newest 44110 0 max.eliaser 2014-06-19 17:28:15 +0000 Some powered USB hubs feed power to the MinnowMax back through the USB port. This does not cause the MinnowMax to power on. However if it's already powered on, removing the MinnowMax's power adapter will not cause it to shut down. Instead, it will continue running happily on power from the USB hub. This works with either the USB 2 or USB 3 port. I have no idea how it would behave if some load were placed on the MinnowMax-- perhaps forcing the CPU into a higher clock/power state would cause it to run out of power and reset. This was with a dual-core A0 board, although A1s probably have the same problem. The specific USB hub tested was this one: http://www.amazon.com/iXCC-Firmware-backwards-compatibility-External/dp/B00GLJLXJG/ref=sr_1_10?ie=UTF8&qid=1403198448&sr=8-10&keywords=ixcc+usb+3 44112 1 sjolley.yp.pm 2014-06-19 17:49:39 +0000 Assigning this to David to fix in a future version of MinnowBoard-MAX. Adding John to the CC list. 46874 2 danders 2014-11-07 19:39:33 +0000 schematic and board layout are complete. performing design review... 47631 3 danders 2014-12-18 22:06:12 +0000 design review complete, ready to order prototypes. 47872 4 mhalstead 2015-01-12 21:37:31 +0000 Updating assignee to new office e-mail address. 74088 5 sjolley.yp.pm 2017-06-13 18:02:41 +0000 We are no longer tracking in Yocto Project Bugzilla MinnowBoard and MinnowBoard-MAX HW and firmware bugs.