7109 2015-01-04 08:51:06 +0000 Is Minnowmax support Wake on Wireless Lan? 2015-03-10 01:26:28 +0000 1 1 12 Hardware Platforms MinnowBoard MAX hw-minnowmax 2C A1 MinnowBoard Max x86_64 RESOLVED WONTFIX Medium normal Production Release 1 xing.wei austin.zhang austin.zhang david.anders david.wei dvhart sjolley.yp.pm warthog9 --- --- Don't know oldest_to_newest 47721 0 xing.wei 2015-01-04 08:51:06 +0000 Hi guys, I had a intel 7260HMW card connected to the mini pcie slot on my extension board(seacat lure reference design). My goal is implement the Wake on Wireless Lan feature on minnowmax, let the wifi card can wake up the system from S3. but when the system go into S3, the power for mpcie(3.3v & 1.5v) was shutdown by default, any method can keep the power for mpcie during S3 state? 47898 1 austin.zhang 2015-01-14 09:39:43 +0000 WOL works well now, so it seemed AUX power/WAKE#/PME/GPE all also works when the system entered into the S3 status. So is this issue from 'the mPCIe wifi was power-off totally and without AUX power enable'? 48668 2 warthog9 2015-02-09 23:58:48 +0000 Wei can you check this with 0.77 and see if this problem is still there as it sounds like (from Austin's comments) this should be fixed. 48683 3 xing.wei 2015-02-10 09:22:57 +0000 Hi john, I've updated the BIOS, test the TP52 in extension board(seacat lure reference design), seems like the 3v3 power still off when system go into S3 state. 48784 4 sjolley.yp.pm 2015-02-12 23:05:29 +0000 Austin can you check what Wei is saying? 48790 5 austin.zhang 2015-02-13 02:17:21 +0000 (In reply to comment #4) > Austin can you check what Wei is saying? Stephen, After update the bios, because the pin for providing power to wifi is still power-off during S3, so Wake-on-WIFI will still not work. 48793 6 sjolley.yp.pm 2015-02-13 02:41:04 +0000 Darren, John, Any suggestions? Thanks, 49072 7 david.wei 2015-02-26 09:21:39 +0000 austin, About your comment: "WOL works well now, so it seemed AUX power/WAKE#/PME/GPE all also works when the system entered into the S3 status." Do you mean that "waking from the onboard Realtek PCIe network card" works well, but "waking from mPCIe WIFI card" still fail? 49108 8 austin.zhang 2015-02-27 04:01:54 +0000 (In reply to comment #7) > Do you mean that "waking from the onboard Realtek PCIe network card" works > well, but "waking from mPCIe WIFI card" still fail? David, you are absolutely right. thanks. P.S, Stephen, the state of "assigned to" was set to me, it seemed to be wrong here:-) 49318 9 david.anders 2015-03-10 01:26:28 +0000 the seacat design did not properly implement the ability to wake from S3. the original design for the seacat was intended to simply test the I/O functionality of the PCIe and SATA interfaces on the High Speed Expansion.