Bug 10269

Summary: Ethernet is not working
Product: [Build System, Metadata & Runtime] BSPs Reporter: Francisco Pedraza <francisco.j.pedraza.gonzalez>
Component: bsps-runtimeAssignee: Francisco Pedraza <francisco.j.pedraza.gonzalez>
Status: RESOLVED NOTABUG QA Contact: Francisco Pedraza <francisco.j.pedraza.gonzalez>
Severity: normal    
Priority: Undecided CC: california.l.sullivan, jose.perez.carranza, sonia.delgado, yp.kernel.watcher, yp.watcher
Version: 2.2   
Target Milestone: 2.2 M3   
Hardware: MinnowBoard Max   
OS: x86   
URL: http://autobuilder.yoctoproject.org/pub/releases/yocto-2.2_M3.rc1/machines/genericx86/core-image-sato-sdk-genericx86.hddimg
Whiteboard:
OS type for building Yocto: --- Type of Regression: Regression (Found by QA test)
Verified: Documentation change: No (bug/feature does not impact docs)

Description Francisco Pedraza 2016-09-13 20:04:47 UTC 
STATUS: FAILED
BUILD: 2.2 M3: 2679a347c576f5411fbe802d2f6201c94036ecb2
ENVIRONMENT: genericx86 - on MMAX32bit



STEPS TO REPRODUCE: 
1. Open a terminal
2. Type the following command on terminal
$ ip addr

Expected Result
The eth0 interface should be displayed with the corresponding IP.

Actual Result
No IP is being displayed after this command.

Making dmesg | tail gets:
r8169 0000:02:00.0 eth0: link down
IPV6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Comment 2 Bruce Ashfield 2016-09-13 20:27:21 UTC 
I don't have access to this board. This is likely just a change in configuration. Putting cal on this and he can re-assign as need be
Comment 3 California Sullivan 2016-09-13 21:29:06 UTC 
I am unable to reproduce this issue.

root@intel-core2-32:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: sit0@NONE: <NOARP> mtu 1480 qdisc noop qlen 1
    link/sit 0.0.0.0 brd 0.0.0.0
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:08:a2:09:bd:af brd ff:ff:ff:ff:ff:ff
    inet 10.7.201.150/24 brd 10.7.201.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::208:a2ff:fe09:bdaf/64 scope link 
       valid_lft forever preferred_lft forever


Please check peripheral/ethernet connections and/or try a different board and let me know the results.
Comment 4 Francisco Pedraza 2016-09-13 21:32:26 UTC 
(In reply to comment #3)
> I am unable to reproduce this issue.
> 
> root@intel-core2-32:~# ip addr
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>     inet 127.0.0.1/8 scope host lo
>        valid_lft forever preferred_lft forever
>     inet6 ::1/128 scope host 
>        valid_lft forever preferred_lft forever
> 2: sit0@NONE: <NOARP> mtu 1480 qdisc noop qlen 1
>     link/sit 0.0.0.0 brd 0.0.0.0
> 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen
> 1000
>     link/ether 00:08:a2:09:bd:af brd ff:ff:ff:ff:ff:ff
>     inet 10.7.201.150/24 brd 10.7.201.255 scope global eth0
>        valid_lft forever preferred_lft forever
>     inet6 fe80::208:a2ff:fe09:bdaf/64 scope link 
>        valid_lft forever preferred_lft forever
> 
> 
> Please check peripheral/ethernet connections and/or try a different board
> and let me know the results.

I just tried with a different board, and everything went good. Seems like I have a faulty board.