Bug 681

Summary: [routerstation]kernel uses incorrect cmdline on Laverne release build.
Product: [Yocto Project Subprojects] Kernel Reporter: Liang Wang <liangliang.wang>
Component: kernel-configurationAssignee: Bruce Ashfield <bruce.ashfield>
Status: RESOLVED WONTFIX QA Contact:
Severity: major    
Priority: Low CC: jiajun.xu, liang.li2, liangliang.wang, sgw, yi.zhao, yp.kernel.watcher, yp.watcher
Version: 0.9   
Target Milestone: 0.9.1   
Hardware: Routerstationpro   
OS: mips   
Whiteboard:
OS type for building Yocto: --- Type of Regression: ---
Verified: Documentation change: ---

Description Liang Wang 2011-01-28 01:22:59 UTC
Testing Environment
===============================
Host: routerstationpro
Kernel: Linux routerstationpro 2.6.34.7-wr-standard-08672-g2ec2eda

Image location: http://autobuilder.pokylinux.org/nightly/20110121-1/machines/routerstationpro/mips/


Steps
===============================
1. Boot up the routerstationpro with sdk image
Boot script: 
RedBoot> load -v vlm-boards/19255/kernel
RedBoot> exec -c "console=ttyS0,115200 root=/dev/nfs rw
nfsroot=128.224.178.20:/export/pxeboot/vlm-boards/19255/rootfs
ip=128.224.178.127:128.224.178.20:128.224.178.1:255.255.254.0::eth0:off
board=UBNT-RSPRO"
2. on target run 'cat /proc/cmdline'



Observed Result
===============================
root@routerstationpro:~# cat /proc/cmdline 
console=ttyS0,115200 root=/dev/nfs rw nfsroot=128.224.178.20:/export/pxeboot/vlm-boards/19255/rootfs ip=dhcp board=UBNT-RSPRO

This issue have been fixed on bug 617. It occurs on build 20110121-1 (Laverne release build), so i open a new bug to trace it.
Comment 1 Bruce Ashfield 2011-01-28 13:02:58 UTC
this commit:

http://git.yoctoproject.org/cgit/cgit.cgi/linux-2.6-windriver/commit/?h=wrs_meta&id=ed446ecd29e8c0f81ab8630a2db652121eeb0b75

fixed the problem. So unless the point release updates the SRCREVs
for the kernel, the fix won't be picked up.
Comment 2 Saul Wold 2011-02-08 10:19:57 UTC
This hardware was not supported by the 0.9 release, the SRCREV provided can be used to enable support, but it will be unsupported for 0.9.  Please use the 1.0 release branch for this to be supported hardware