Bug 6825

Summary: I2C dmesg error
Product: [Build System, Metadata & Runtime] BSPs Reporter: Costin <costin.c.constantin>
Component: bsps-meta-intelAssignee: Unassigned <unassigned>
Status: VERIFIED WONTFIX QA Contact: oscar lopez arandas <oscarx.lopez.arandas>
Severity: minor    
Priority: Low CC: jose.perez.carranza, richard.purdie, tom.zanussi
Version: 1.7   
Target Milestone: Future   
Hardware: E-Menlow   
OS: x86   
Whiteboard:
OS type for building Yocto: --- Type of Regression: ---
Verified: Documentation change: Don't know

Description Costin 2014-10-13 10:23:00 UTC
Hello, 

While testing TC215: "system dmesg log check:, I got this error message:

- extracted from context, as on TC:
root@intel-core2-32:~# dmesg | grep -i error
[    6.737238] gma500 0000:00:02.0: I2C transfer error

- with context:
root@intel-core2-32:~# dmesg | grep -i -C10 error
[    3.607384] acpi device:03: registered as cooling_device1
[    3.612116] acpi device:04: registered as cooling_device2
[    3.612565] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    3.612939] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.612945] [drm] No driver support for vblank timestamp query.
[    4.101706] cfg80211: Calling CRDA to update world regulatory domain
[    4.253492] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    4.253503] Copyright(c) 2003- 2014 Intel Corporation
[    6.123990] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1
[    6.124008] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1
[    6.737238] gma500 0000:00:02.0: I2C transfer error
[    6.745060] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0
[    7.383515] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.831207] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    7.831222] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.831231] sound hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.831237] sound hdaudioC0D0:    mono: mono_out=0x0
[    7.831244] sound hdaudioC0D0:    inputs:
[    7.831252] sound hdaudioC0D0:      Mic=0x18
[   10.249120] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   10.249255] e1000e 0000:02:00.0 eth0: 10/100 speed: disabling TSO


TC content:

1.make sure no other operation after startup the system.
2.run " dmesg | grep -i error" in the terminal.
3.check if there is any error log printed.

Expected TC results:
No error message in dmesg.


poky:  5367855fe56db0c09b8fa7bb423b9de18d11eecc
meta-intel: 8e5fe6c0f5cf710e1a46c5f203e52f069874768a
tested image: intel-core2-32
hardware used: E-Menlow

Costin
Comment 1 Richard Purdie 2017-06-20 10:53:10 UTC
We're not planning any further work on E-Menlow, closing.
Comment 2 oscar lopez arandas 2017-07-05 14:30:01 UTC
We're not planning any further work on E-Menlow, closing.