While testing fedora26, nightly-arm Sanity test is failing with following error: NOTE: core-image-minimal-1.0-r0 do_testimage: Check full boot log: /home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/build/tmp/work/qemuarm-poky-linux-gnueabi/core-image-minimal/1.0-r0/testimage/qemu_boot_log.20170802002313 WARNING: core-image-minimal-1.0-r0 do_testimage: Qemu ended unexpectedly, dump data from host is in /tmp/oe-saved-tests/201708012024_qemu WARNING: core-image-minimal-1.0-r0 do_testimage: qemu-system ended unexpectedly NOTE: core-image-minimal-1.0-r0 do_testimage: Sending SIGTERM to runqemu ERROR: core-image-minimal-1.0-r0 do_testimage: testimage received SIGTERM, shutting down... ERROR: core-image-minimal-1.0-r0 do_testimage: core-image-minimal - FAILED - tests were interrupted during execution ERROR: core-image-minimal-1.0-r0 do_testimage: Function failed: do_testimage ERROR: Logfile of failure stored in: /home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/build/tmp/work/qemuarm-poky-linux-gnueabi/core-image-minimal/1.0-r0/temp/log.do_testimage.2269 NOTE: recipe core-image-minimal-1.0-r0: task do_testimage: Failed ERROR: Task (/home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/meta/recipes-core/images/core-image-minimal.bb:do_testimage) failed with exit code '1' NOTE: core-image-sato-sdk-1.0-r0 do_testimage: Qemu pid didn't appeared in 60 seconds WARNING: core-image-sato-sdk-1.0-r0 do_testimage: Qemu ended unexpectedly, dump data from host is in /tmp/oe-saved-tests/201708012025_qemu NOTE: core-image-sato-1.0-r0 do_testimage: Qemu pid didn't appeared in 60 seconds WARNING: core-image-sato-1.0-r0 do_testimage: Qemu ended unexpectedly, dump data from host is in /tmp/oe-saved-tests/201708012025_qemu NOTE: core-image-sato-sdk-1.0-r0 do_testimage: Sending SIGTERM to runqemu NOTE: core-image-sato-sdk-1.0-r0 do_testimage: Output from runqemu: ERROR: core-image-sato-sdk-1.0-r0 do_testimage: testimage received SIGTERM, shutting down... ERROR: core-image-sato-sdk-1.0-r0 do_testimage: core-image-sato-sdk - FAILED - tests were interrupted during execution ERROR: core-image-sato-sdk-1.0-r0 do_testimage: Function failed: do_testimage NOTE: core-image-sato-1.0-r0 do_testimage: Sending SIGTERM to runqemu ERROR: Logfile of failure stored in: /home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/build/tmp/work/qemuarm-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/temp/log.do_testimage.2267 NOTE: recipe core-image-sato-sdk-1.0-r0: task do_testimage: Failed NOTE: core-image-sato-1.0-r0 do_testimage: Output from runqemu: ERROR: core-image-sato-1.0-r0 do_testimage: testimage received SIGTERM, shutting down... ERROR: core-image-sato-1.0-r0 do_testimage: core-image-sato - FAILED - tests were interrupted during execution ERROR: core-image-sato-1.0-r0 do_testimage: Function failed: do_testimage ERROR: Task (/home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/meta/recipes-sato/images/core-image-sato-sdk.bb:do_testimage) failed with exit code '1' ERROR: Logfile of failure stored in: /home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/build/tmp/work/qemuarm-poky-linux-gnueabi/core-image-sato/1.0-r0/temp/log.do_testimage.2268 NOTE: recipe core-image-sato-1.0-r0: task do_testimage: Failed ERROR: Task (/home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/meta/recipes-sato/images/core-image-sato.bb:do_testimage) failed with exit code '1' NOTE: Tasks Summary: Attempted 565 tasks of which 554 didn't need to be rerun and 3 failed. NOTE: The errors for this build are stored in /home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/build/tmp/log/error-report/error_report_20170802002313.txt You can send the errors to a reports server by running: send-error-report /home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/build/tmp/log/error-report/error_report_20170802002313.txt [-s server] NOTE: The contents of these logs will be posted in public if you use the above command with the default server. Please ensure you remove any identifying or proprietary information when prompted before sending. NOTE: Writing buildhistory + buildhistory_commit + '[' '!' -d /tmp/yocto-autobuilder/buildhistory/poky/master/nightly-arm ']' + cat + cd /tmp/yocto-autobuilder/buildhistory/poky/master/nightly-arm/ + '[' '!' -e .git ']' + git tag -f build-minus-3 build-minus-2 + true + git tag -f build-minus-2 build-minus-1 + git tag -f build-minus-1 + check_git_config + git config user.email + git config user.name ++ git status --porcelain ++ grep -v ' metadata-revs$' + repostatus= ++ hostname + HOSTNAME=fedora26 + CMDLINE='bitbake -v core-image-minimal core-image-sato core-image-sato-sdk -c testimage' + '[' '' '!=' '' ']' + buildhistory_single_commit 'bitbake -v core-image-minimal core-image-sato core-image-sato-sdk -c testimage' fedora26 + '[' '' = '' ']' + commitopts='/tmp/yocto-autobuilder/buildhistory/poky/master/nightly-arm/ --allow-empty' + shortlogprefix='No changes: ' + '[' 3 = 0 ']' + result=failed + case 0 in ++ mktemp + commitmsgfile=/tmp/tmp.l5lKzB4xUj + cat + cat /tmp/yocto-autobuilder/buildhistory/poky/master/nightly-arm/metadata-revs + git commit /tmp/yocto-autobuilder/buildhistory/poky/master/nightly-arm/ --allow-empty -F /tmp/tmp.l5lKzB4xUj --author 'buildhistory <buildhistory@poky>' + rm /tmp/tmp.l5lKzB4xUj + '[' 'file:////tmp/yocto-autobuilder/buildhistory-repo poky/master/nightly-arm:poky/master/nightly-arm' '!=' '' ']' + git push -q file:////tmp/yocto-autobuilder/buildhistory-repo poky/master/nightly-arm:poky/master/nightly-arm fatal: '//tmp/yocto-autobuilder/buildhistory-repo' does not appear to be a git repository fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. + true + ret=0 + trap '' 0 + exit 0 Summary: 3 tasks failed: /home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/meta/recipes-core/images/core-image-minimal.bb:do_testimage /home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/meta/recipes-sato/images/core-image-sato-sdk.bb:do_testimage /home/ab/yocto-autobuilder/yocto-worker/nightly-arm/build/meta/recipes-sato/images/core-image-sato.bb:do_testimage Summary: There were 4 WARNING messages shown. Summary: There were 9 ERROR messages shown, returning a non-zero exit code. program finished with exit code 1 elapsedTime=178.194673
This doesn't appear to be a code defect in yocto-autobuilder. It looks like qemu is failing to start, could you please attach the qemu_boot_log.* and log.do_testimage.* files referenced in the output? Is this error only seen with nightly-arm buildset on fedora26? Also, it looks like the yocto-autobuilder instance is configured to push buildhistory but the target repository doesn't exist.
Sonia, could you provide the requested logs? We're running fedora26 on the public AB and haven't seen this issue.
Created attachment 3958 [details] core image-minimal log
Created attachment 3959 [details] core image-sato log
Created attachment 3960 [details] core image-sato-sdk log
(In reply to comment #2) > Sonia, could you provide the requested logs? We're running fedora26 on the > public AB and haven't seen this issue. I have included log.do_testimage.* files, the qemu_boot_log.* is not present, even it is menioned in main log. First test i ran was with 6964efddd31c479386d1643c1025bc102710392f and yesterday i ran a newest review cd26fc143bbfd948795c2e65a577f89627a4f841 and error is exactly the same. As additional info, these are the qemu packages and versions installed in my fedora26, in case it could helps. ipxe-roms-qemu.noarch 20161108-2.gitb991c67.fc26 libvirt-daemon-driver-qemu.x86_64 3.2.1-5.fc26 @updates qemu-block-curl.x86_64 2:2.9.0-5.fc26 @updates qemu-block-dmg.x86_64 2:2.9.0-5.fc26 @updates qemu-block-gluster.x86_64 2:2.9.0-5.fc26 @updates qemu-block-iscsi.x86_64 2:2.9.0-5.fc26 @updates qemu-block-nfs.x86_64 2:2.9.0-5.fc26 @updates qemu-block-rbd.x86_64 2:2.9.0-5.fc26 @updates qemu-block-ssh.x86_64 2:2.9.0-5.fc26 @updates qemu-common.x86_64 2:2.9.0-5.fc26 @updates qemu-guest-agent.x86_64 2:2.9.0-5.fc26 @updates qemu-img.x86_64 2:2.9.0-5.fc26 @updates qemu-kvm.x86_64 2:2.9.0-5.fc26 @updates qemu-system-x86.x86_64 2:2.9.0-5.fc26 @updates qemu-system-x86-core.x86_64 2:2.9.0-5.fc26 @updates
info provided
Note " Qemu pid didn't appeared in 60 seconds"
closing based on ed9d0fa5a92f837b14ff8f4e8d433da92d7dc968 and 03aa1ef733032e1acae4d291580968301679117f commits. Should the issue recur, the additional logging info that was also added as part of these commits should help.