Trying to run "runqemu qemumips core-image-rt" results in: $ runqemu qemumips core-image-rt Assuming core-image-rt really means /build/poky/qemumips/tmp/deploy/images/core-image-rt-qemumips.ext3 Continuing with the following parameters: KERNEL: [/build/poky/qemumips/tmp/deploy/images/vmlinux-qemumips.bin] ROOTFS: [/build/poky/qemumips/tmp/deploy/images/core-image-rt-qemumips.ext3] FSTYPE: [ext3] Setting up tap interface under sudo Acquiring lockfile for tap0... WARNING: distccd not present, no distcc support loaded. Running qemu-system-mips... /build/poky/qemumips/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-mips -kernel /build/poky/qemumips/tmp/deploy/images/vmlinux-qemumips.bin -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=no,downscript=no -M malta -hda /build/poky/qemumips/tmp/deploy/images/core-image-rt-qemumips.ext3 -no-reboot -vga cirrus -show-cursor -usb -usbdevice wacom-tablet -no-reboot -m 128 --append "root=/dev/hda rw console=ttyS0 console=tty ip=192.168.7.2::192.168.7.1:255.255.255.0 mem=128M " /build/poky/qemumips/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-mips: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory Set 'tap0' nonpersistent Releasing lockfile of preconfigured tap device 'tap0' Checking ldd results in: $ ldd /build/poky/qemumips/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-mips linux-vdso.so.1 => (0x00007fff3abff000) librt.so.1 => /lib/librt.so.1 (0x00007fb6a2265000) libattr.so.1 => /lib/libattr.so.1 (0x00007fb6a2060000) libpthread.so.0 => /lib/libpthread.so.0 (0x00007fb6a1e42000) libutil.so.1 => /lib/libutil.so.1 (0x00007fb6a1c3f000) libcurl.so.4 => not found libncurses.so.5 => /build/poky/qemumips/tmp/sysroots/x86_64-linux/usr/bin/../../usr/lib/libncurses.so.5 (0x00007fb6a1a1c000) libtinfo.so.5 => /build/poky/qemumips/tmp/sysroots/x86_64-linux/usr/bin/../../usr/lib/libtinfo.so.5 (0x00007fb6a17f4000) libasound.so.2 => /build/poky/qemumips/tmp/sysroots/x86_64-linux/usr/bin/../../usr/lib/libasound.so.2 (0x00007fb6a1506000) libpng12.so.0 => /lib/libpng12.so.0 (0x00007fb6a12df000) libSDL-1.2.so.0 => /usr/lib/libSDL-1.2.so.0 (0x00007fb6a104b000) libX11.so.6 => /usr/lib/libX11.so.6 (0x00007fb6a0d15000) libm.so.6 => /lib/libm.so.6 (0x00007fb6a0a91000) libz.so.1 => /build/poky/qemumips/tmp/sysroots/x86_64-linux/usr/bin/../../usr/lib/libz.so.1 (0x00007fb6a087a000) libdl.so.2 => /lib/libdl.so.2 (0x00007fb6a0676000) libGL.so.1 => /usr/lib/mesa/libGL.so.1 (0x00007fb6a0404000) libGLU.so.1 => /usr/lib/libGLU.so.1 (0x00007fb6a0192000) libc.so.6 => /lib/libc.so.6 (0x00007fb69fe0f000) /lib64/ld-linux-x86-64.so.2 (0x00007fb6a247a000) libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007fb69fbf1000) libXext.so.6 => /usr/lib/libXext.so.6 (0x00007fb69f9df000) libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0x00007fb69f7dc000) libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x00007fb69f5d5000) libXxf86vm.so.1 => /usr/lib/libXxf86vm.so.1 (0x00007fb69f3cf000) libdrm.so.2 => /lib/libdrm.so.2 (0x00007fb69f1c4000) libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x00007fb69eebd000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00007fb69eca7000) libXau.so.6 => /usr/lib/libXau.so.6 (0x00007fb69eaa4000) libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007fb69e89d000) There seems to be an interesting mix of host and sysroot libraries linked to the qemu-system-mips binary. Is this a host contamination issue or a missing host dependencies issue? Ubuntu 10.10 does not have a libcurl4 package (only dev,doc,dbg etc)
Installing libcurl4-dev and manually creating the libcurl.so.4 symlink got this working again for me - but this is not a resolution. lrwxrwxrwx 1 root root 23 2011-09-22 14:22 libcurl-gnutls.so -> libcurl-gnutls.so.4.2.0 lrwxrwxrwx 1 root root 17 2011-09-22 14:22 libcurl.so -> libcurl-gnutls.so lrwxrwxrwx 1 root root 10 2011-09-22 14:23 libcurl.so.4 -> libcurl.so
Also applies to qemuppc.
At Saul's request I checked to see if libX11 or libcurl had been built natively. I did not see either tmp/work/x86_64-linux.
Can you please send the log.do_configure for qemu-native I want to see what it looked for.
Created attachment 250 [details] log.do_configure I didn't have a log.do_configure as this build pulled qemu-native in from sstate. I did a cleanall and built qemu-native, log.do_configure attached. It found the gnutls version of curl (also on my host system) so it runs without failure now, but it links to mostly host libraries. Current ldd: $ ldd /build/poky/qemuppc/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-ppc linux-vdso.so.1 => (0x00007fff0154b000) librt.so.1 => /lib/librt.so.1 (0x00007f0601dcb000) libpthread.so.0 => /lib/libpthread.so.0 (0x00007f0601bae000) libutil.so.1 => /lib/libutil.so.1 (0x00007f06019aa000) libcurl-gnutls.so.4 => /usr/lib/libcurl-gnutls.so.4 (0x00007f0601758000) libncurses.so.5 => /build/poky/qemuppc/tmp/sysroots/x86_64-linux/usr/bin/../../usr/lib/libncurses.so.5 (0x00007f0601536000) libtinfo.so.5 => /build/poky/qemuppc/tmp/sysroots/x86_64-linux/usr/bin/../../usr/lib/libtinfo.so.5 (0x00007f060130d000) libasound.so.2 => /build/poky/qemuppc/tmp/sysroots/x86_64-linux/usr/bin/../../usr/lib/libasound.so.2 (0x00007f060101f000) libuuid.so.1 => /build/poky/qemuppc/tmp/sysroots/x86_64-linux/usr/bin/../../usr/lib/libuuid.so.1 (0x00007f0600e1a000) libpng12.so.0 => /lib/libpng12.so.0 (0x00007f0600bf3000) libSDL-1.2.so.0 => /usr/lib/libSDL-1.2.so.0 (0x00007f060095f000) libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f0600629000) libm.so.6 => /lib/libm.so.6 (0x00007f06003a5000) libz.so.1 => /build/poky/qemuppc/tmp/sysroots/x86_64-linux/usr/bin/../../usr/lib/libz.so.1 (0x00007f060018e000) libdl.so.2 => /lib/libdl.so.2 (0x00007f05fff8a000) libGL.so.1 => /usr/lib/mesa/libGL.so.1 (0x00007f05ffd18000) libGLU.so.1 => /usr/lib/libGLU.so.1 (0x00007f05ffaa6000) libc.so.6 => /lib/libc.so.6 (0x00007f05ff723000) /lib64/ld-linux-x86-64.so.2 (0x00007f0601fe1000) libidn.so.11 => /usr/lib/libidn.so.11 (0x00007f05ff4ef000) liblber-2.4.so.2 => /usr/lib/liblber-2.4.so.2 (0x00007f05ff2e1000) libldap_r-2.4.so.2 => /usr/lib/libldap_r-2.4.so.2 (0x00007f05ff096000) libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2 (0x00007f05fee61000) libgnutls.so.26 => /usr/lib/libgnutls.so.26 (0x00007f05febbf000) libgcrypt.so.11 => /lib/libgcrypt.so.11 (0x00007f05fe947000) libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f05fe729000) libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f05fe517000) libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0x00007f05fe313000) libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x00007f05fe10d000) libXxf86vm.so.1 => /usr/lib/libXxf86vm.so.1 (0x00007f05fdf07000) libdrm.so.2 => /lib/libdrm.so.2 (0x00007f05fdcfb000) libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x00007f05fd9f5000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00007f05fd7df000) libresolv.so.2 => /lib/libresolv.so.2 (0x00007f05fd5c5000) libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x00007f05fd3ab000) libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x00007f05fd0e9000) libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x00007f05fcec2000) libcom_err.so.2 => /build/poky/qemuppc/tmp/sysroots/x86_64-linux/usr/bin/../../usr/lib/libcom_err.so.2 (0x00007f05fccbe000) libkrb5support.so.0 => /usr/lib/libkrb5support.so.0 (0x00007f05fcab6000) libkeyutils.so.1 => /lib/libkeyutils.so.1 (0x00007f05fc8b2000) libtasn1.so.3 => /usr/lib/libtasn1.so.3 (0x00007f05fc6a1000) libgpg-error.so.0 => /lib/libgpg-error.so.0 (0x00007f05fc49d000) libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f05fc299000) libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f05fc093000)
This is related to the host system libraries possibly changing due to an upgrade. *** This bug has been marked as a duplicate of bug 1516 ***