As with every release, we need to evaluate the reference BSPs to see if any replacements/refreshes are required. The boards should be affordable, and available. Otherwise, there are few limitations. In particular for 1.3: 1) MIPS reference: the routerstationpro is not being sold anymore. A replacement should be chosen and a BSP created. The suggestions are: - fuloong(mips64/mips32) http://www.lemote.com/en/products/Notebook/2010/0310/112.html - http://en.qi-hardware.com/wiki/Ben_NanoNote 2) ARM: depreciate the beagleboard in favour of another ARM reference. Suggestions are: - raspberry pi - pandaboard - ?? 3) qemuarm: update to a cortex based simulation The x86 and powerpc reference boards continue to be sufficient, unless someone from the community has other suggestions.
Bruce, is this likely to complete for 1.3? I'm thinking it sounds more like a 1.4 effort.
To quote project management .. it's a 'bubble' for 1.3. I'll look into it, but if it moves out, nothing is lost.
Reviving this for 1.4.
MIPS suggested refresh: http://www.ubnt.com/edgemax
bumping to 1.5, but this will be handled before 1.4 completes.
Moving to 1.6, and increasing the priority. We have momentum on this now.
Updating to indicate the selected BSPs: - Edge Router Lite (MIPS) - Beaglebone Black BSPs are underway, but will be completed with the 1.6 kernel is available (likely 3.14)
meta-yocto now contains the beaglebone and edgerouter BSPs so this appears to be done now.
Hi, We have Beagleboard scattered throughout the manual set. I am in the process of purging these out and replacing where possible. One spot is the "Super User" section in the QS - http://www.yoctoproject.org/docs/1.6/yocto-project-qs/yocto-project-qs.html#super-user. I am not sure what to do regarding this section. Is it still valid? Thanks, Scott
Hi, I have updated the example in the "Super User" section (http://www.yoctoproject.org/docs/1.6/yocto-project-qs/yocto-project-qs.html#super-user) to use the Beaglebone hardware rather than the Beagleboard hardware. This conversion for the new BSP is complete now throughout the manual set. Setting the documentation flag to "Done." Scott
That seems like a reasonable change to me.
Setting this to verified as per above comments.