LVDS touchscreens does not work on imx6qsabreauto. Support needs to be included in kernel (from linux-imx-3.0.35)
Applied in bcea664dcc53be5dc6c5d95c6b2313f9ebb0756f
At the moment I try to get the LVDS Touch Screen (MCIMX-LVDS1) working on the imx6qsabreauto. But it doesn't seem to be fixed... evtest already gets input and the device is registered as /dev/input/event1 and /dev/input/mouse0 I built the latest branch (dora) and the layer fsl-image-gui. The Xorg.conf doesn't show the touch screen and also the Sato UI doesn't recognize the touchScreen (because it is not registered in XServer). So can we reopen this ticket?
Right; I reopened it. Leonardo, are you able to test this?
Thanks for reopening. I could also provide logs and step-by-step for reproducing the bug. I really need this feature and would like to support you as much as I can.
(In reply to comment #3) > Right; I reopened it. > > Leonardo, are you able to test this? Hi Otavio/Florian I have not tested it yet. I am about to finish two pending issues so during perhaps Wednesday I start testing/debugging this issue. Leo
(In reply to comment #4) > Thanks for reopening. > > I could also provide logs and step-by-step for reproducing the bug. I really > need this feature and would like to support you as much as I can. Florian, right now I do not have a board to test but for the moment, please try the following On the sources/meta-fsl-arm/recipes-kernel/linux/linux-imx_3.0.35.bb, REMOVE the line where this patch is indicated file://0005-ENGR00271359-Add-Multi-touch-support.patch Bake and test please.
(In reply to comment #6) > (In reply to comment #4) > > Thanks for reopening. > > > > I could also provide logs and step-by-step for reproducing the bug. I really > > need this feature and would like to support you as much as I can. > > Florian, right now I do not have a board to test but for the moment, please > try the following > > On the sources/meta-fsl-arm/recipes-kernel/linux/linux-imx_3.0.35.bb, REMOVE > the line where this patch is indicated > > file://0005-ENGR00271359-Add-Multi-touch-support.patch > > > Bake and test please. I have tested removing this patch and the touch-screen works. Due to time restrictions, I did not test this issue on a clean image (by clean I mean no changes on any branch, just dora HEADS), what I just did is what I indicated in the last msg and boot it. Arrow Pointer is following my finger's touch so I believe this fixes the issue. Florian, Help me to confirm the latter so I can send a patch.
Ok thanks for the advice - I will test it in the next few days!
Yes, indeed - after removing the Multitouch-Patch everything works in the fsl-image-gui image. Btw: Does anyone know if this patch also adds multitouch support for QtQuick 4.8? Thanks a lot everybody!
I think we need to better understand this issue so we can proper fix it. Florian, can you check if changing: CONFIG_TOUCHSCREEN_EGALAX_SINGLE_TOUCH = n makes it work?
You mean I should add the patch back in again and then add CONFIG_TOUCHSCREEN_EGALAX_SINGLE_TOUCH = n to the .bb file, right?
No; to the defconfig of kernel.
Sorry but I have to admit, that I didn't do this before - where can I set this variable in the defconfig? Thanks Florian
(In reply to comment #13) > Sorry but I have to admit, that I didn't do this before - where can I set > this variable in the defconfig? > > Thanks > Florian Hi Florian, Create a patch adding the CONFIG into the defconfig, then just the kernel and deploy. % modify the defconfig under meta-fsl-arm % bitbake -c compile -f imx-linux % bitbake -c deploy imx-linux % dd if ....... % boot the board. If worked, then create the patch. Leo
Created attachment 1649 [details] Defconfig patch Oh ok, thanks. Didn't find the defconfig before. The patch is attached and yes, it works the way Otavio suggested!
Please close this out if this is fixed in your branch, thanks
Daiane, can you try it in Daisy and check if it can be reproducable?
Tested on daisy, with core-image-x11 and default DISTRO_FEATURES It worked for me. I'm going to close this issue