BB_VERSION = "1.21.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Fedora-19" TARGET_SYS = "arm-poky-linux-gnueabi" MACHINE = "qemuarm" DISTRO = "poky" DISTRO_VERSION = "1.5+snapshot-20131105" TUNE_FEATURES = "armv5 thumb dsp" TARGET_FPU = "soft" meta meta-yocto meta-yocto-bsp = "master:9160f376065752e2e92c8b37ee9a80d0eb86b53b" bitbake core-image-sato runqemu qemuarm core-image-sato serial Assuming core-image-sato really means /home/stefans/yocto/poky/build/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.ext3 Continuing with the following parameters: KERNEL: [/home/stefans/yocto/poky/build/tmp/deploy/images/qemuarm/zImage-qemuarm.bin] ROOTFS: [/home/stefans/yocto/poky/build/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.ext3] FSTYPE: [ext3] Acquiring lockfile for tap0... Using preconfigured tap device 'tap0' If this is not intended, use flock on /tmp/qemu-tap-locks/tap0.lock to make runqemu skip tap0. Interrupt character is '^]' Running qemu-system-arm... /home/stefans/yocto/poky/build/tmp/sysroots/x86_64-linux/usr/bin/qemu-system-arm -kernel /home/stefans/yocto/poky/build/tmp/deploy/images/qemuarm/zImage-qemuarm.bin -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=no,downscript=no -M versatilepb -hda /home/stefans/yocto/poky/build/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.ext3 -no-reboot -show-cursor -usb -usbdevice wacom-tablet -no-reboot -serial stdio -m 128 --append "root=/dev/sda rw console=ttyAMA0,115200 console=tty ip=192.168.7.2::192.168.7.1:255.255.255.0 mem=128M highres=off console=ttyS0" Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.10.17-yocto-standard (stefans@firebird) (gcc version 4.8.1 (GCC) ) #1 PREEMPT Tue Nov 5 10:31:47 EET 2013 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 CPU: VIVT data cache, VIVT instruction cache Machine: ARM-Versatile PB Memory policy: ECC disabled, Data cache writeback sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: root=/dev/sda rw console=ttyAMA0,115200 console=tty ip=192.168.7.2::192.168.7.1:255.255.255.0 mem=128M highres=off console=ttyS0 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) allocated 262144 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 128MB = 128MB total Memory: 120336k/120336k available, 10736k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc07b6b70 (7867 kB) .init : 0xc07b7000 - 0xc0806e2c ( 320 kB) .data : 0xc0808000 - 0xc085c468 ( 338 kB) .bss : 0xc085c468 - 0xc0916070 ( 744 kB) SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:224 VIC @f1140000: id 0x00041190, vendor 0x41 FPGA IRQ chip 0 "SIC" @ f1003000, 13 irqs Console: colour dummy device 80x30 console [tty0] enabled Calibrating delay loop... 758.16 BogoMIPS (lpj=3790848) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 Initializing cgroup subsys debug Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Testing write buffer coherency: ok ftrace: allocating 20582 entries in 61 pages Setting up static identity map for 0xc058c168 - 0xc058c1c0 devtmpfs: initialized xor: measuring software checksum speed arm4regs : 797.600 MB/sec 8regs : 922.800 MB/sec 32regs : 894.800 MB/sec xor: using function: 8regs (922.800 MB/sec) NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations Serial: AMBA PL011 UART driver dev:f1: ttyAMA0 at MMIO 0x101f1000 (irq = 44) is a PL011 rev1 console [ttyAMA0] enabled dev:f2: ttyAMA1 at MMIO 0x101f2000 (irq = 45) is a PL011 rev1 dev:f3: ttyAMA2 at MMIO 0x101f3000 (irq = 46) is a PL011 rev1 fpga:09: ttyAMA3 at MMIO 0x10009000 (irq = 70) is a PL011 rev1 PCI core found (slot 11) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:0d.0: BAR 2: assigned [mem 0x50000000-0x50001fff] pci 0000:00:0d.0: BAR 1: assigned [mem 0x50002000-0x500023ff] pci 0000:00:0c.0: BAR 0: assigned [mem 0x50002400-0x500024ff] pci 0000:00:0d.0: BAR 0: assigned [io 0x1000-0x10ff] bio: create slab <bio-0> at 0 raid6: int32x1 336 MB/s raid6: int32x2 275 MB/s raid6: int32x4 190 MB/s raid6: int32x8 155 MB/s raid6: using algorithm int32x1 (336 MB/s) raid6: using intx1 recovery algorithm vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource timer3 NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: enabling device 0000:00:0c.0 (0100 -> 0102) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. bio: create slab <bio-1> at 1 Btrfs loaded aufs 3.10-20130819 msgmni has been set to 235 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) clcd-pl11x dev:20: PL110 rev0 at 0x10120000 clcd-pl11x dev:20: Versatile hardware, VGA display Console: switching to colour frame buffer device 80x30 brd: module loaded PCI: enabling device 0000:00:0d.0 (0100 -> 0103) sym0: <895a> rev 0x0 at pci 0000:00:0d.0 irq 93 sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 scsi 0:0:0:0: ABORT operation started scsi 0:0:0:0: ABORT operation timed-out. scsi 0:0:0:0: DEVICE RESET operation started scsi 0:0:0:0: DEVICE RESET operation timed-out. scsi 0:0:0:0: BUS RESET operation started scsi 0:0:0:0: BUS RESET operation timed-out. scsi 0:0:0:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:0:0: HOST RESET operation timed-out. scsi 0:0:0:0: Device offlined - not ready after error recovery scsi 0:0:1:0: ABORT operation started scsi 0:0:1:0: ABORT operation timed-out. scsi 0:0:1:0: DEVICE RESET operation started scsi 0:0:1:0: DEVICE RESET operation timed-out. scsi 0:0:1:0: BUS RESET operation started scsi 0:0:1:0: BUS RESET operation timed-out. scsi 0:0:1:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:1:0: HOST RESET operation timed-out. scsi 0:0:1:0: Device offlined - not ready after error recovery scsi 0:0:2:0: ABORT operation started scsi 0:0:2:0: ABORT operation timed-out. scsi 0:0:2:0: DEVICE RESET operation started scsi 0:0:2:0: DEVICE RESET operation timed-out. scsi 0:0:2:0: BUS RESET operation started scsi 0:0:2:0: BUS RESET operation timed-out. scsi 0:0:2:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:2:0: HOST RESET operation timed-out. scsi 0:0:2:0: Device offlined - not ready after error recovery scsi 0:0:3:0: ABORT operation started scsi 0:0:3:0: ABORT operation timed-out. scsi 0:0:3:0: DEVICE RESET operation started scsi 0:0:3:0: DEVICE RESET operation timed-out. scsi 0:0:3:0: BUS RESET operation started scsi 0:0:3:0: BUS RESET operation timed-out. scsi 0:0:3:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:3:0: HOST RESET operation timed-out. scsi 0:0:3:0: Device offlined - not ready after error recovery scsi 0:0:4:0: ABORT operation started scsi 0:0:4:0: ABORT operation timed-out. scsi 0:0:4:0: DEVICE RESET operation started scsi 0:0:4:0: DEVICE RESET operation timed-out. scsi 0:0:4:0: BUS RESET operation started scsi 0:0:4:0: BUS RESET operation timed-out. scsi 0:0:4:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:4:0: HOST RESET operation timed-out. scsi 0:0:4:0: Device offlined - not ready after error recovery scsi 0:0:5:0: ABORT operation started scsi 0:0:5:0: ABORT operation timed-out. scsi 0:0:5:0: DEVICE RESET operation started scsi 0:0:5:0: DEVICE RESET operation timed-out. scsi 0:0:5:0: BUS RESET operation started scsi 0:0:5:0: BUS RESET operation timed-out. scsi 0:0:5:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:5:0: HOST RESET operation timed-out. scsi 0:0:5:0: Device offlined - not ready after error recovery scsi 0:0:6:0: ABORT operation started scsi 0:0:6:0: ABORT operation timed-out. scsi 0:0:6:0: DEVICE RESET operation started scsi 0:0:6:0: DEVICE RESET operation timed-out. scsi 0:0:6:0: BUS RESET operation started scsi 0:0:6:0: BUS RESET operation timed-out. scsi 0:0:6:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:6:0: HOST RESET operation timed-out. scsi 0:0:6:0: Device offlined - not ready after error recovery scsi 0:0:8:0: ABORT operation started scsi 0:0:8:0: ABORT operation timed-out. scsi 0:0:8:0: DEVICE RESET operation started scsi 0:0:8:0: DEVICE RESET operation timed-out. scsi 0:0:8:0: BUS RESET operation started scsi 0:0:8:0: BUS RESET operation timed-out. scsi 0:0:8:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:8:0: HOST RESET operation timed-out. scsi 0:0:8:0: Device offlined - not ready after error recovery scsi 0:0:9:0: ABORT operation started scsi 0:0:9:0: ABORT operation timed-out. scsi 0:0:9:0: DEVICE RESET operation started scsi 0:0:9:0: DEVICE RESET operation timed-out. scsi 0:0:9:0: BUS RESET operation started scsi 0:0:9:0: BUS RESET operation timed-out. scsi 0:0:9:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:9:0: HOST RESET operation timed-out. scsi 0:0:9:0: Device offlined - not ready after error recovery scsi 0:0:10:0: ABORT operation started scsi 0:0:10:0: ABORT operation timed-out. scsi 0:0:10:0: DEVICE RESET operation started scsi 0:0:10:0: DEVICE RESET operation timed-out. scsi 0:0:10:0: BUS RESET operation started scsi 0:0:10:0: BUS RESET operation timed-out. scsi 0:0:10:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:10:0: HOST RESET operation timed-out. scsi 0:0:10:0: Device offlined - not ready after error recovery scsi 0:0:11:0: ABORT operation started scsi 0:0:11:0: ABORT operation timed-out. scsi 0:0:11:0: DEVICE RESET operation started scsi 0:0:11:0: DEVICE RESET operation timed-out. scsi 0:0:11:0: BUS RESET operation started scsi 0:0:11:0: BUS RESET operation timed-out. scsi 0:0:11:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:11:0: HOST RESET operation timed-out. scsi 0:0:11:0: Device offlined - not ready after error recovery scsi 0:0:12:0: ABORT operation started scsi 0:0:12:0: ABORT operation timed-out. scsi 0:0:12:0: DEVICE RESET operation started scsi 0:0:12:0: DEVICE RESET operation timed-out. scsi 0:0:12:0: BUS RESET operation started scsi 0:0:12:0: BUS RESET operation timed-out. scsi 0:0:12:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:12:0: HOST RESET operation timed-out. scsi 0:0:12:0: Device offlined - not ready after error recovery scsi 0:0:13:0: ABORT operation started scsi 0:0:13:0: ABORT operation timed-out. scsi 0:0:13:0: DEVICE RESET operation started scsi 0:0:13:0: DEVICE RESET operation timed-out. scsi 0:0:13:0: BUS RESET operation started scsi 0:0:13:0: BUS RESET operation timed-out. scsi 0:0:13:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:13:0: HOST RESET operation timed-out. scsi 0:0:13:0: Device offlined - not ready after error recovery scsi 0:0:14:0: ABORT operation started scsi 0:0:14:0: ABORT operation timed-out. scsi 0:0:14:0: DEVICE RESET operation started scsi 0:0:14:0: DEVICE RESET operation timed-out. scsi 0:0:14:0: BUS RESET operation started scsi 0:0:14:0: BUS RESET operation timed-out. scsi 0:0:14:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:14:0: HOST RESET operation timed-out. scsi 0:0:14:0: Device offlined - not ready after error recovery scsi 0:0:15:0: ABORT operation started scsi 0:0:15:0: ABORT operation timed-out. scsi 0:0:15:0: DEVICE RESET operation started scsi 0:0:15:0: DEVICE RESET operation timed-out. scsi 0:0:15:0: BUS RESET operation started scsi 0:0:15:0: BUS RESET operation timed-out. scsi 0:0:15:0: HOST RESET operation started sym0: SCSI BUS has been reset. scsi 0:0:15:0: HOST RESET operation timed-out. scsi 0:0:15:0: Device offlined - not ready after error recovery smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net> eth0: SMC91C11xFD (rev 1) at c89d4000 IRQ 57 [nowait] eth0: Ethernet addr: 52:54:00:12:34:56 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:0c.0: OHCI Host Controller ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0c.0: irq 93, io mem 0x50002400 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver wacom rtc-pl031 dev:e8: rtc core: registered pl031 as rtc0 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com mmci-pl18x: probe of fpga:05 failed with error -38 mmci-pl18x: probe of fpga:0b failed with error -38 usbcore: registered new interface driver usbhid usbhid: USB HID core driver oprofile: no performance counters oprofile: using timer interrupt. u32 classifier Actions configured TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 console [netcon0] enabled netconsole: network logging started rtc-pl031 dev:e8: setting system clock to 2013-11-05 08:53:19 UTC (1383641599) sym0: unknown interrupt(s) ignored, ISTAT=0x1 DSTAT=0x80 SIST=0x0 input: AT Raw Set 2 keyboard as /devices/fpga:06/serio0/input/input0 eth0: link up IP-Config: Complete: device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 host=192.168.7.2, domain=, nis-domain=(none) bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= usb 1-1: new full-speed USB device number 2 using ohci_hcd input: Wacom Penpartner as /devices/pci0000:00/0000:00:0c.0/usb1/1-1/1-1:1.0/input/input1 input: ImExPS/2 Generic Explorer Mouse as /devices/fpga:07/serio1/input/input2 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. VFS: Cannot open root device "sda" or unknown-block(0,0): error -6 Please append a correct "root=" boot option; here are the available partitions: VFS: Unable to mount root fs on unknown-block(0,0) User configuration error - no valid root filesystem found Kernel panic - not syncing: Invalid configuration from end user prevents continuing CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.17-yocto-standard #1 [<c00154a0>] (unwind_backtrace+0x0/0xec) from [<c0011ccc>] (show_stack+0x20/0x24) [<c0011ccc>] (show_stack+0x20/0x24) from [<c0582ad4>] (dump_stack+0x20/0x28) [<c0582ad4>] (dump_stack+0x20/0x28) from [<c057d8e4>] (panic+0x94/0x1d8) [<c057d8e4>] (panic+0x94/0x1d8) from [<c07b8170>] (mount_block_root+0x22c/0x27c) [<c07b8170>] (mount_block_root+0x22c/0x27c) from [<c07b83a0>] (mount_root+0xe8/0x110) [<c07b83a0>] (mount_root+0xe8/0x110) from [<c07b8530>] (prepare_namespace+0x168/0x1c8) [<c07b8530>] (prepare_namespace+0x168/0x1c8) from [<c07b7cf4>] (kernel_init_freeable+0x214/0x264) [<c07b7cf4>] (kernel_init_freeable+0x214/0x264) from [<c057c1b0>] (kernel_init+0x18/0xf4) [<c057c1b0>] (kernel_init+0x18/0xf4) from [<c000ded0>] (ret_from_fork+0x14/0x20)
I've got this.
patch sent to the list.
http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=e9ec1538b52610e4e77ccf801411b8a95de990ca
Marked as Verified.