For those systems that require kernel loadable firmware modules, use of the linux-firmware [sub] packages are used. This gets the firmware packaged up, but they are not installed in a bootable image. For example, MACHINE=igep0030 bitbake poky-image-minimal in a clean tree. No kernel modules: [gthomas@titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib ld-2.12.1.so libattr.so.1.1.0 libgcc_s.so.1 libnss_dns-2.12.1.so librt-2.12.1.so ld-linux.so.3 libc-2.12.1.so libgudev-1.0.so.0 libnss_dns.so.2 librt.so.1 libBrokenLocale-2.12.1.so libc.so.6 libgudev-1.0.so.0.0.1 libnss_files-2.12.1.so libudev.so.0 libBrokenLocale.so.1 libcidn-2.12.1.so libm-2.12.1.so libnss_files.so.2 libudev.so.0.9.3 libacl.so.1 libcidn.so.1 libm.so.6 libproc-3.2.8.so libutil-2.12.1.so libacl.so.1.1.0 libcrypt-2.12.1.so libnsl-2.12.1.so libpthread-2.12.1.so libutil.so.1 libanl-2.12.1.so libcrypt.so.1 libnsl.so.1 libpthread.so.0 modules libanl.so.1 libdl-2.12.1.so libnss_compat-2.12.1.so libresolv-2.12.1.so udev libattr.so.1 libdl.so.2 libnss_compat.so.2 libresolv.so.2 The directory /lib/firmware is not installed.
Gary, without these firmware and module files, can the kernel (igep0030) boot successfully? As from most of the machine configuration files in current poky, including igep0030.conf, "kernel-modules" and "linux-firmware-sd8686" are part of "MACHINE_EXTRA_RRECOMMENDS", like: MACHINE_EXTRA_RRECOMMENDS = " kernel-modules linux-firmware-sd8686" However for poky-image-minimal, only "MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS" is included. If the kernel module and firmware files are indeed necessary for successful boot, we can add them into minimal image. Richard, any comments on that? Thanks, Dongxiao
Currently igep machines have been deprecated in poky. Besides, minimal image is a smallest set of packages which only support successfully booting. If more features are needed, we should use sato, sato-sdk, or other image types. Thus close the bug.