Image location: http://autobuilder.yoctoproject.org/pub/nightly/20140826-2/machines/p1022ds/ Git rev: poky: master/52b788c6df9201764130ab744bf67b770b24b896 meta-fsl-ppc: master/d953212ae5936a7d969d13801b0c2c1eb65cee6f The SATA hard disk in the box is not mounted automatically when system boot up. When plug a usb stick, it also can not be mounted automatically. Here are the logs in serial port when a usb stick is plugged: ########################### root@p1022ds:~# root@p1022ds:~# usb 1-1: new high-speed USB device number 2 using fsl-ehci usb-storage 1-1:1.0: USB Mass Storage device detected scsi2 : usb-storage 1-1:1.0 scsi 2:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: [sdb] 3905407 512-byte logical blocks: (1.99 GB/1.86 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08 sd 2:0:0:0: [sdb] No Caching mode page found sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] No Caching mode page found sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] No Caching mode page found sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Attached SCSI removable disk root@p1022ds:~# root@p1022ds:~# mount 128.224.162.226:/export/pxeboot/rootfs on / type nfs (rw,relatime,vers=2,rsize=4096,wsize=4096,namlen=255,hard,nolock,proto=udp,timeo=11,retrans=3,sec=sys,mountaddr=128.224.162.226,moun tvers=1,mountproto=udp,local_lock=all,addr=128.224.162.226) devtmpfs on /dev type devtmpfs (rw,relatime,size=1002052k,nr_inodes=173348,mode=755) proc on /proc type proc (rw,relatime) tmpfs on /mnt/.psplash type tmpfs (rw,relatime,size=40k) sysfs on /sys type sysfs (rw,relatime) debugfs on /sys/kernel/debug type debugfs (rw,relatime) tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755) tmpfs on /var/volatile type tmpfs (rw,relatime) devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620) root@p1022ds:~# ####################### This is a regression issue. It works on 1.7 M2 rc1. (git rev: poky/2d1660112e54653f7bb763939d0416472c49fe01 meta-fsl-ppc/5efa2d27dcf4637b008faf782b5e257b748b24c0). Here are the logs when I plug a usb stick in 1.7 M2 rc1 build: ####################### root@p1022ds:~# root@p1022ds:~# usb 1-1: new high-speed USB device number 2 using fsl-ehci usb-storage 1-1:1.0: USB Mass Storage device detected scsi2 : usb-storage 1-1:1.0 scsi 2:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: [sdb] 3905407 512-byte logical blocks: (1.99 GB/1.86 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08 sd 2:0:0:0: [sdb] No Caching mode page found sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] No Caching mode page found sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] No Caching mode page found sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Attached SCSI removable disk kjournald starting. Commit interval 5 seconds EXT3-fs (sdb1): using internal journal EXT3-fs (sdb1): recovery complete EXT3-fs (sdb1): mounted filesystem with writeback data mode root@p1022ds:~# root@p1022ds:~# mount 128.224.162.226:/export/pxeboot/rootfs on / type nfs (rw,relatime,vers=2,rsize=4096,wsize=4096,namlen=255,hard,nolock,proto=udp,timeo=11,retrans=3,sec=sys,mountaddr=128.224.162.226,moun tvers=1,mountproto=udp,local_lock=all,addr=128.224.162.226) devtmpfs on /dev type devtmpfs (rw,relatime,size=1002040k,nr_inodes=173342,mode=755) proc on /proc type proc (rw,relatime) tmpfs on /mnt/.psplash type tmpfs (rw,relatime,size=40k) sysfs on /sys type sysfs (rw,relatime) debugfs on /sys/kernel/debug type debugfs (rw,relatime) tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755) tmpfs on /var/volatile type tmpfs (rw,relatime) devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620) /dev/sda1 on /run/media/sda1 type ext2 (rw,relatime,errors=continue) /dev/sda5 on /run/media/sda5 type ext3 (rw,relatime,errors=continue,user_xattr,barrier=1,data=writeback) /dev/sda6 on /run/media/sda6 type ext3 (rw,relatime,errors=continue,user_xattr,barrier=1,data=writeback) /dev/sda3 on /run/media/sda3 type ext3 (rw,relatime,errors=continue,user_xattr,barrier=1,data=writeback) /dev/sdb1 on /run/media/sdb1 type ext3 (rw,relatime,errors=continue,user_xattr,barrier=1,data=writeback) root@p1022ds:~# ######################
Created attachment 2093 [details] /var/log/messages in current imag
Created attachment 2094 [details] /var/log/message in 1.7 m2 rc1 build
by default, auto-mounting is disabled. see http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/commit/?id=06c140cb72406b6d88140ca1085c20352ba193d4 you can revert this commit to see if it works.
(In reply to comment #3) > by default, auto-mounting is disabled. see > http://git.yoctoproject.org/cgit/cgit.cgi/meta-fsl-ppc/commit/ > ?id=06c140cb72406b6d88140ca1085c20352ba193d4 > > you can revert this commit to see if it works. Thanks for your reply. So this should not be a bug. Mark it as NOTABUG.