Bug 6672 - I2C Touch HID device should be removed from DSDT
Summary: I2C Touch HID device should be removed from DSDT
Status: CLOSED FIXED
Alias: None
Product: MinnowBoard MAX Firmware
Classification: Hardware Platforms
Component: minnowmax-edk2 (show other bugs)
Version: 2C A1
Hardware: MinnowBoard Max x86_64
: Medium normal
Target Milestone: Production Release
Assignee: Ivan Rouzanov
QA Contact:
URL:
Whiteboard:
Depends on:
Blocks:
 
Reported: 2014-09-03 02:25 UTC by Ivan Rouzanov
Modified: 2015-02-12 02:26 UTC (History)
2 users (show)

See Also:
OS type for building Yocto: ---
Type of Regression: ---
Verified:
Documentation change: Don't know


Attachments

Note You need to log in before you can comment on or make changes to this bug.
Description Ivan Rouzanov 2014-09-03 02:25:38 UTC
Current Firmware release (0x71) contains I2C Touch controller device definition in DSDT:

...
            Device(SHUB)
            {
                Name(_ADR, Zero)
                Name(_HID, "SMO91D0")
                Name(_CID, "PNP0C50")
...
                Method(_CRS, 0x0, Serialized)
                {
                        GpioIO(Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0, ResourceConsumer, , RawDataBuffer() {}) {0x3b}
...

Since it is not actually connected to the chip (and in fact GPIO_S0_SC[059] (0x3b) is HDMI_DCDC_ENB), the SHUB device should be removed from DSDT table.
Comment 1 David_Wei 2014-09-03 07:34:36 UTC
We have cleanned up ACPI table, we will switch to this new clean version late this month after QA test.
Comment 2 David_Wei 2014-10-09 06:34:35 UTC
Hi Ivan,

This bug has been fixed by open source release. Please verify and close it.
Comment 3 Ivan Rouzanov 2015-02-12 02:26:48 UTC
Closed.