I've created the bsp for beaglebone using "yocto-bsp create" tool, it references the beagleboard in myboneblack.conf, after build it fails to boot. It should reference the Beaglebone and not beagleboard. conf file is at: https://github.com/vishnupatekar/meta-myboneblack/blob/master/conf/machine/myboneblack.conf e.g. in conf file 1. KERNEL_DEVICETREE = "${S}/arch/arm/boot/dts/omap3-beagle.dts ${S}/arch/arm/boot/dts/omap3-beagle-xm.dts" 2. SERIAL_CONSOLE = "115200 ttyO2" it should be ttyO0. Below is bsp creation log: ----------------------------------------------------------- vishnu@vishnu-Inspiron-N4010:~/yocto/yoctobone/build$ yocto-bsp create myboneblack arm Checking basic git connectivity... Done. Would you like to use the default (3.14) kernel? (y/n) [default: y] n Please choose the kernel to use in this BSP: [default: linux-yocto_3.14] 1) linux-yocto-tiny_3.14 2) linux-yocto-dev 3) linux-yocto_3.10 4) linux-yocto_3.14 5) linux-yocto-tiny_3.10 6) linux-yocto-rt_3.10 7) custom 2 Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n] [default: y] n Getting branches from remote repo git://git.yoctoproject.org/linux-yocto-dev.git... Please choose a machine branch to base this BSP on: [default: standard/base] 1) standard/arm-versatile-926ejs 2) standard/base 3) standard/beagleboard 4) standard/beaglebone 5) standard/ck 6) standard/crownbay 7) standard/edf 8) standard/edgerouter 9) standard/fishriver 10) standard/fsl-mpc8315e-rdb 11) standard/minnow 12) standard/mti-malta32 13) standard/mti-malta64 14) standard/qemuppc 15) standard/routerstationpro 16) standard/sys940x 4 Would you like SMP support? (y/n) [default: y] Which machine tuning would you like to use? [default: tune_cortexa8] 1) arm1136jf-s tuning optimizations 2) arm920t tuning optimizations 3) arm926ejs tuning optimizations 4) arm9tdmi tuning optimizations 5) cortexa5 tuning optimizations 6) cortexa7 tuning optimizations 7) cortexa8 tuning optimizations 8) cortexa9 tuning optimizations 9) cortexa15 tuning optimizations 10) cortexm1 tuning optimizations 11) cortexm3 tuning optimizations 12) cortexr4 tuning optimizations 13) ep9312 tuning optimizations 14) iwmmxt tuning optimizations 15) strongarm1100 tuning optimizations 16) xscale tuning optimizations 7 Please specify a value for UBOOT_MACHINE: [default: omap3_beagle_config] am335x_evm_config Please specify a value for UBOOT_ENTRYPOINT: [default: 0x80008000] Please specify a value for UBOOT_LOADADDRESS: [default: 0x80008000] Do you need support for X? (y/n) [default: y] Does your BSP have a touchscreen? (y/n) [default: n] Does your BSP have a keyboard? (y/n) [default: y] New arm BSP created in meta-myboneblack
Verify in Master Also.
Verified in master result is same as before.
Fixed by 1.7 update finally pulled in: 0cc9a12ff855ad472c082efc429043208112b888
Hi Vishnu, Can you verify and see if the fix is correct?
(In reply to comment #2) > Verified in master result is same as before. Kind reminder
(In reply to comment #3) > Fixed by 1.7 update finally pulled in: > 0cc9a12ff855ad472c082efc429043208112b888 Verified with master: 5c76cebc24675edb3dff473fce9b67cedff615db SERIAL_CONSOLE = "115200 ttyO0" PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto-dev" KERNEL_IMAGETYPE = "uImage" KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb"