Bug 6866 - No GPIO controlled LED available
Summary: No GPIO controlled LED available
Status: RESOLVED MOVED
Alias: None
Product: MinnowBoard MAX
Classification: Hardware Platforms
Component: hw-minnowmax (show other bugs)
Version: 2C A2
Hardware: MinnowBoard Max x86_64
: Medium normal
Target Milestone: A4 Release
Assignee: David Anders
QA Contact:
URL:
Whiteboard:
Depends on:
Blocks:
 
Reported: 2014-10-22 18:42 UTC by David Anders
Modified: 2017-06-13 18:05 UTC (History)
5 users (show)

See Also:
OS type for building Yocto: ---
Type of Regression: ---
Verified:
Documentation change: Don't know

Attachments
Add an attachment (proposed patch, testcase, etc.)

Note You need to log in before you can comment on or make changes to this bug.
Description David Anders 2014-10-22 18:42:48 UTC 
the minnowboard max does not have a GPIO controlled led available for dynamic feedback during boot, firmware, or operating system. the D2 power led will be configured as a GPIO controlled LED using GPIO_S5_22 signal. the LED will be configured to be on by default when the system is powered up to a normal operating status. once the system is operational, firmware and OS can control the status of the LED.
Comment 1 David Anders 2014-11-07 19:38:26 UTC 
schematic and board layout are complete. performing design review...
Comment 2 David Anders 2014-12-18 22:05:31 UTC 
design review complete, ready to order prototypes.
Comment 3 Michael Halstead 2015-01-12 21:37:30 UTC 
Updating assignee to new office e-mail address.
Comment 4 California Sullivan 2015-08-20 21:30:34 UTC 
Toggling the value of GPIO 104 (GPIO_S5_22) dims and brightens one of the LEDs but does not turn it on and off.
Comment 5 Stephen K Jolley 2017-06-13 18:05:08 UTC 
We are no longer tracking in Yocto Project Bugzilla MinnowBoard and MinnowBoard-MAX HW and firmware bugs.