Dear Community, Ive got several problems, we´d edited the defconfig file with menuconfig. During compiling the kernel, ive got the following messages. Id uploaded my steps and a Error-log to pastebin http://pastebin.com/77NcqZGv Thanks in Advance. --------------------------------------------------------------- Build Configuration: BB_VERSION = "1.22.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Ubuntu-14.04" TARGET_SYS = "arm-poky-linux-gnueabi" MACHINE = "nitrogen6x" DISTRO = "poky" DISTRO_VERSION = "1.6.1" TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa9" TARGET_FPU = "vfp-neon" meta meta-yocto = "(nobranch):313864bf528696a72c3ee6b3dec1a0c7b0b223f6" meta-oe = "(nobranch):518cd119a8724dbd485a5d5c5047de59e8fbd652" meta-fsl-arm = "(nobranch):4e694e727aa8babfd0ba06c5e98bab3753b39a8b" meta-fsl-arm-extra = "(nobranch):46c9fe7cfb12afcd75ad427eb3518de029aa766f" meta-fsl-demos = "(nobranch):f141c7d1158b8addbd6f1ed047a1b47c2ed85f8f" meta-qt5 = "daisy:c29c317e0f22202bfaa85329a580564bbc179089" meta-ruby meta-multimedia = "(nobranch):518cd119a8724dbd485a5d5c5047de59e8fbd652"
Without knowing what you changed during the menuconfig phase, there's not much we can say. i.e. this is a straight forward missing build dependency. | make[1]: *** No rule to make target `arch/arm/boot/dts/imx6q-nitrogen6_max.dtb'. Stop. | make: *** [imx6q-nitrogen6_max.dtb] Error 2 | ERROR: oe_runmake failed | WARNING: exit code 1 from a shell command. | ERROR: Function failed: do_install (log file is located at /home/user/yocto/build/tmp/work/nitrogen6x-poky-linux-gnueabi/linux-imx/3.10.17-r0/temp/log.do_install.31802) ERROR: Task 2 (/home/user/yocto/sources/meta-fsl-arm/recipes-kernel/linux/linux-imx_3.10.17.bb, do_install) failed with exit code '1' NOTE: Tasks Summary: Attempted 409 tasks of which 398 didn't need to be rerun and 1 failed. No currently running tasks (409 of 416) ----------------- Also, can this be reproduced using linux-yocto and a reference BSP ? If this is only triggered using the imx kernel, then the maintainers of that layer should be contacted.
Wed changed nothing, thats the interesting part. We use a Sabrelite Board from Boundary as reference Board. Wed do not have edited the .config or defconfig, we just typed menuconfig. The defconfig and .config is the same as before. My log is made during doing the steps showed in the log, wed have a fresh clone of the daisy branche.
There's nothing that I can see wrong with kernel.bbclass, have you checked with the maintainers of the BSP ? Without being able to reproduce this, or have it happen with a linux-yocto reference BSP, there's little I can do at the moment.
setting as needinfo, since we need to hear from the maintainers of the referenced recipe.
Fixed in Dizzy
verified as per above comments