the minnowboard max HDMI interface does not work with DVI devices using the Texas Instruments TFP-401 or TFP-501 chipsets. Initial tests on the baytrail based NUC also showed the same issue. after upgrading the firmware in the NUC, the problem went away. additionally, when using Coreboot on the MinnowBoard Max, the issue is also not present. testing has indicated that the EDID is being read properly and that using a powered HDMI Switch or powered HDMI Splitter allows the display to work. this leads to the conclusion that this is a firmware issue. we need someone in PRC to replicate this issue and debug. http://www.adafruit.com/products/2260 http://www.ti.com/product/tfp401 i have one of the adafruit displays for testing. do we need to ship this to PRC or have them purchase one for testing?
Didn't find that in local PRC. Can you ship it to us, David?
Stephen, Please get this to Gunilla to be shipped out. Thanks,
Board Ordered - Will send to PRC.
Shipped to Ying Y Yang in PRC.
We got the board, and we upgrade the GOP to the latest as NUC used, but got no luck. Following is test cases GOP version result 7.2.1011 fail 7.2.1013 fail 7.2.1111 fail Asign back to Dave to see if it is a hardware issue.
Tested with an A4 board. Still fails.
We are no longer tracking in Yocto Project Bugzilla MinnowBoard and MinnowBoard-MAX HW and firmware bugs.