Hi, I'm still learning my way around yocoto, but currently I am getting the following build error when comiling VAR-SOM-MX6 - Yocto fsl-L3.10.53-1.1.0 Daisy R7. ---------------------------------------------------------------------------- radek@debianradek:~/var-som-mx6-daisy-v7/build_fb$ time bitbake fsl-image-qt5 WARNING: Host distribution "Debian-8.0" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution. Loading cache: 100% |###########################################| ETA: 00:00:00 Loaded 2199 entries from dependency cache. NOTE: Resolving any missing task queue dependencies NOTE: multiple providers are available for jpeg (jpeg, libjpeg-turbo) NOTE: consider defining a PREFERRED_PROVIDER entry to match jpeg NOTE: multiple providers are available for runtime libgl-mesa-dev (mesa, mesa-gl) NOTE: consider defining a PREFERRED_PROVIDER entry to match libgl-mesa-dev NOTE: multiple providers are available for runtime libglapi (mesa, mesa-gl) NOTE: consider defining a PREFERRED_PROVIDER entry to match libglapi Build Configuration: BB_VERSION = "1.22.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Debian-8.0" TARGET_SYS = "arm-poky-linux-gnueabi" MACHINE = "varsomimx6" DISTRO = "poky" DISTRO_VERSION = "1.6.2" TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa9" TARGET_FPU = "vfp-neon" meta meta-yocto = "(nobranch):30b8d9378b8260e452552b806610dc9b6fe0b69f" meta-oe = "(nobranch):8065dd8456913457a0114ddb2b4bd4842847b2a3" meta-fsl-arm = "(nobranch):9bc540eec9a7e280af13371ea70650fcc47ea627" meta-fsl-arm-extra = "(nobranch):e1085deb3d915d2a95a65cceadc77c6de0dadfb6" meta-fsl-demos = "(nobranch):f141c7d1158b8addbd6f1ed047a1b47c2ed85f8f" meta-fsl-arm meta-fsl-demos = "(nobranch):0c5367e963b5f7797ded59f835313466b896d7e9" meta-browser = "(nobranch):63963cc56c8d0291779693e62b66cb16e5c86883" meta-gnome meta-networking meta-ruby = "(nobranch):8065dd8456913457a0114ddb2b4bd4842847b2a3" meta-qt5 = "(nobranch):c29c317e0f22202bfaa85329a580564bbc179089" meta-fsl-qt5 meta-fsl-bluez = "(nobranch):0c5367e963b5f7797ded59f835313466b896d7e9" meta-variscite = "<unknown>:<unknown>" NOTE: Preparing runqueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks ERROR: Function failed: do_configure (log file is located at /home/radek/var-som-mx6-daisy-v7/build_fb/tmp/work/x86_64-linux/qemu-native/1.7.0-r0/temp/log.do_configure.1150) ERROR: Logfile of failure stored in: /home/radek/var-som-mx6-daisy-v7/build_fb/tmp/work/x86_64-linux/qemu-native/1.7.0-r0/temp/log.do_configure.1150 Log data follows: | DEBUG: Executing python function sysroot_cleansstate | DEBUG: Python function sysroot_cleansstate finished | DEBUG: Executing shell function autotools_preconfigure | DEBUG: Shell function autotools_preconfigure finished | DEBUG: Executing python function autotools_copy_aclocals | DEBUG: Python function autotools_copy_aclocals finished | DEBUG: Executing shell function do_configure | | ERROR: User requested feature sdl | configure was not able to find it | | WARNING: exit code 1 from a shell command. | ERROR: Function failed: do_configure (log file is located at /home/radek/var-som-mx6-daisy-v7/build_fb/tmp/work/x86_64-linux/qemu-native/1.7.0-r0/temp/log.do_configure.1150) ERROR: Task 4213 (virtual:native:/home/radek/var-som-mx6-daisy-v7/sources/poky/meta/recipes-devtools/qemu/qemu_1.7.0.bb, do_configure) failed with exit code '1' NOTE: Tasks Summary: Attempted 1491 tasks of which 1490 didn't need to be rerun and 1 failed. No currently running tasks (1490 of 4443) Summary: 1 task failed: virtual:native:/home/radek/var-som-mx6-daisy-v7/sources/poky/meta/recipes-devtools/qemu/qemu_1.7.0.bb, do_configure Summary: There was 1 WARNING message shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. real 0m13.150s user 0m10.820s sys 0m0.720s ---------------------------------------------------------------------------- Any help would be greatly appreciated! Also, during actual installation (following the instructions on http://variwiki.com/index.php?title=VAR-SOM-MX6_Yocto_GS_R7), when I perform the following steps I get a fail on one of the patchset hunks: $ cd ~/var-som-mx6-daisy-v7 $ tar xvf ~/Downloads/var_yocto_v7-4.tar.bz2 $ variscite/install ... ---------------------------------------------------------------------------- 1 out of 1 hunk FAILED -- saving rejects to file meta-networking/recipes-connectivity/crda/crda_1.1.3.bb.rej $ cat ./sources/meta-opeetworking/recipes-connectivity/crda/crda_1.1.3.bb.rej --- meta-networking/recipes-connectivity/crda/crda_1.1.3.bb +++ meta-networking/recipes-connectivity/crda/crda_1.1.3.bb @@ -7,9 +7,13 @@ LIC_FILES_CHKSUM = "file://LICENSE;md5=07c4f6dea3845b02a18dc00c8c87699c" DEPENDS = "python-m2crypto-native python-native libgcrypt libnl" -SRC_URI = "http://wireless.kernel.org/download/crda/${BP}.tar.bz2;name=crda \ - http://wireless.kernel.org/download/wireless-regdb/regulatory.bins/2013.01.11-regulatory.bin;name=bin \ +#SRC_URI = "http://wireless.kernel.org/download/crda/${BP}.tar.bz2;name=crda \ +# http://wireless.kernel.org/download/wireless-regdb/regulatory.bins/2013.01.11-regulatory.bin;name=bin \ +#" +SRC_URI = "http://www.kernel.org/pub/software/network/crda/${BP}.tar.bz2;name=crda \ + http://distfiles.lesslinux.org/2013.01.11-regulatory.bin;name=bin \ " + SRC_URI[crda.md5sum] = "29579185e06a75675507527243d28e5c" SRC_URI[crda.sha256sum] = "aa8a7fe92f0765986c421a5b6768a185375ac210393df0605ee132f6754825f0" SRC_URI[bin.md5sum] = "e0c8a5ca63fb8bf803213f9a0c90b50b" Thanks in advance, Radek.
The error message is: | ERROR: User requested feature sdl | configure was not able to find it You can try to install the sdl-dev or sdl-devel on the host, and build again, or bitbake qemu-naive -ccleansstate && bitbake qemu-naive to build again, or build a fresh project. For the do_patch error of crda_1.1.3.bb, it is not in yocto, you can check it here: git clone git://git.openembedded.org/meta-openembedded It is crda_3.13.bb on the master branch, maybe you need checkout to another branch. // Robert
invalid; sdl package to be installed