VGA framebuffer console grows memory consumption and slows down boot significantly due to slow CPU based drawing and scrolling. When an embedded device is non-headless, graphics support can be enabled using a config fragment as necessary.
For the intel-quark BSP this makes sense as I have verified it's unlikely that a quark based platform will have a framebuffer, but for core2 or corei7 platforms the following fragment will disable the VGA_CONSOLE along with the FRAMEBUFFER_CONSOLE Create a new config fragment with the following contents, and add it to your SRC_URI. # CONFIG_VGA_CONSOLE is not set # CONFIG_DUMMY_CONSOLE is not set # CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set The kernel size difference as measured by "ls -l" is 29,440 bytes.
This has been addressed as part of commit: http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/commit/?id=e226a9f68052035bd2a4330e0ef2feeb467f7fb2 The quark config fragments changes are here: http://git.yoctoproject.org/cgit/cgit.cgi/yocto-kernel-cache/commit/?id=0b960965a79286d60dce81884ebeab70a4fcdee5 This does not disable the intel-core* BSP framebuffer console configuration as these are meant to be generic BSPs for multiple Intel platforms, the changes made for quark could be carried by a layer that wishes to have custom or production configurations for specific devices.
Verified: fc45deac89ef63ca1c44e763c38ced7dfd72cbe1, framebuffer disabled