We are using Am335x based custom board, with -256MB RAM -4 GB flash /etc/opkg.conf file contents are as follows, ---------------------------- src/gz repo file:///home/ --- dest ram /tmp lists_dir ext /var/opkg-lists option overlay_root /overlay -------------------------------- opkg version : opkg version 0.1.8 For updating firmware in the device we are doing following, 1. Transfer debian(s) packages to /home folder through web-gui(web-server running on the board). 2. After debian(s) are transferred install it using opkg, Now debian(s) are already present in the /home directory and its max size can be 500MB if below command is used to install the downloaded debians, opkg -f /etc/opkg.conf -d ram install packageName package debian first copied to /tmp/opkg-xxx/ and extracted there and then installed As /tmp is mounted on tmpfs (RAM=256MB) opkg-cl install fails when debian was bigger ~200MB. so I used another approach of proving tmp_dir(/var/tmp --> on flash) as follows, opkg -f /etc/opkg.conf -d ram -t /var/tmp packageName Now it works but problem is time to install the package is more, because During installation again debian is copied from /home(eMMC with ext4 filesystem) to /var/tmp/opkg-xxx (eMMC with ext4 filesystem) and then extracted and then installation happens, This process is increasing installation time. Considering /home and /var/tmp being on the same filesystem if direct debian extraction happens to /var/tmp/opkg-xxxx it would save time to install debian using opkg. This could be time saving feature when local path is used for src/gz installation.
Functionality already provided by cache_local_files config option.