1. Configure a edgerouter BSP. 2. echo "DEFAULTTUNE = \"mips64-nf\"" >>conf/local.conf 3. bitbake core-image-sato
We have the following in a bbappend for libjpeg-turbo in our layer to work around this problem: SIMD = "" SIMD_mipsel = " --without-simd" EXTRA_OECONF_append_class-target = "${SIMD}"
Hi, libjpeg-turbo-1.5.0 was released yesteerday. I got the same error as Kevin Hao mentioned while trying to build 1.5.0 release. (In reply to comment #1) > We have the following in a bbappend for libjpeg-turbo in our layer to work > around this problem: > > SIMD = "" > SIMD_mipsel = " --without-simd" > > EXTRA_OECONF_append_class-target = "${SIMD}" Peter, could you share the local.conf changes that you have done to build the mipsel BSP? In my case, the mipsel build of libjpeg-turbo - 1.5.0 went fine with the following config: MACHINE= "edgerouter" DEFAULTTUNE= "mips32el"
Build Failure: | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S: Assembler messages: | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2842: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mtc1 $9,$f0' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2845: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f2,0($6)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2846: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f10,0($5)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2847: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f4,4($6)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2848: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f12,4($5)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2849: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f6,8($6)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2850: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f14,8($5)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2851: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f8,12($6)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2852: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f16,12($5)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2853: Error: opcode not supported on this processor: mips32r2 (mips32r2) `madd.s $f2,$f0,$f2,$f10' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2854: Error: opcode not supported on this processor: mips32r2 (mips32r2) `madd.s $f4,$f0,$f4,$f12' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2855: Error: opcode not supported on this processor: mips32r2 (mips32r2) `madd.s $f6,$f0,$f6,$f14' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2856: Error: opcode not supported on this processor: mips32r2 (mips32r2) `madd.s $f8,$f0,$f8,$f16' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2857: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f10,16($5)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2858: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f12,20($5)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2859: Error: opcode not supported on this processor: mips32r2 (mips32r2) `trunc.w.s $f2,$f2' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2860: Error: opcode not supported on this processor: mips32r2 (mips32r2) `trunc.w.s $f4,$f4' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2861: Error: opcode not supported on this processor: mips32r2 (mips32r2) `trunc.w.s $f6,$f6' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2862: Error: opcode not supported on this processor: mips32r2 (mips32r2) `trunc.w.s $f8,$f8' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2863: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f14,24($5)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2864: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f16,28($5)' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2865: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfc1 $9,$f2' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2866: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfc1 $10,$f4' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2867: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfc1 $11,$f6' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2868: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfc1 $12,$f8' | ../../libjpeg-turbo-1.5.0/simd/jsimd_mips_dspr2.S:2869: Error: opcode not supported on this processor: mips32r2 (mips32r2) `lwc1 $f2,16($6)' <snip> libjpeg-turbo don't have non-floating point ABI support in MIPS at the moment. We can work-around using: EXTRA_OECONF_append_class-target = " ${@bb.utils.contains("MIPSPKGSFX_FPU", "-nf", "--without-simd", "", d)}"
Fix/upgrade sent to oe-core: http://lists.openembedded.org/pipermail/openembedded-core/2016-June/122601.html
http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=3332061f69ea03e1165f3c8b64197d3f35ffb95e
Verified with poky master: e274a5167ea2e495355bd1382b1388d047b845d7